Tim Gunning It
I made an absolutely beautiful Kielo Wrap Dress a while back and blogged about it here, and, as seen in my 2016 New Year post, another version of the dress was added to my To-Make list. I loved how Named Clothing used a simple striped fabric to create a bold look with the design, so I thought I would take some inspiration from their blog and make a replica. I chose a medium-weight super soft striped knit jersey from organiccottonplus.com in an earthtone shade, and I even used my new croquis book by Gertie to sketch out the idea of the dress. The additional sleeve pattern hack that Named provided on their blog and accompanying instructions were definitely lacking, but I figured it out like a champ and managed to complete the dress, from start to finish, in one day.
Here was the result.
I don’t even know where to start with everything that looks terrible about this dress, and if I am totally honest, I am still not sure exactly what went wrong. I know it’s not the pattern, because I made the dress before to much success. So I am blaming it on my fabric choice. Why is my fabric choice so wrong, you ask? I don’t know. Sometimes the universe provides you with questions but no answers. Honestly it’s probably a whole combination of weird reasons, and I could sit here and speculate forever about it, but I wont. I’ll just focus on what is terrible instead of trying to figure out why it’s terrible. Here we go.
Reasons This Dress Is Terrible:
-It looks huge on me. And I don’t know why. This dress is actually a smaller size than the original one I made!
-It doesn’t retain it’s shape or any of the design features. As you can see in the Named Clothing blog photo below, the folds on the sides look crisp and defined and the wrap holds it’s shape.
Not so with my version. Mine looks like a three-day old soggy burrito wrap.
-Also do you see how uneven my darts are? I have no idea why they were in separate places and in different lengths; you would think I had never sewn a dart before in my life! This fabric was posessed I tell you.
-When I tried to hem the sleeves, the bottom of the dress, and the neckline, my fabric went berserk on me and stretched out to twice it’s size like this.
I did everything I could to keep this from happening. I switched from a twin needle to a single needle. I switched from ironing the folds of the seam allowance to simply pinning them down, just in case my iron was inadvertently stretching the fabric out. I steamed the hems to see if they would shrink back to their initial lengths. I used my walking foot to keep the knit fabric from getting stretched out under my needle. Nothing really seemed to do the trick.
Simply put, this fabric and design, for whatever reason, did not go well together. Which was a shame, because I had been dreaming about this dress for MONTHS! Every time I walked by this fabric draped over my couch in the craft room, I would wipe a bit of drool off my face and think to myself, I am gonna look SO DAMN FLY when this is finished!
As you can see from the pitiful look on my face, I don’t feel fly at all. I even tried to pair it with different shoes, hoping with all my heart that it wasn’t the DRESS that was a mess, that it just needed to be styled in the perfect way (as you can see, no styling could fix this thing). I contemplated cutting off the ties and having it be one of those baggy sack dresses that tall girls in NYC always seem to get away with looking chic in. But I was only fooling myself. This dress needed either a dramatic makeover or it needed to go in the Butthole Bin. I hated the thought of wasting this beautiful fabric on a pattern that it was just not meant to be paired with, so after laughing with Claire for a VERY long time and taking these horror movie-like photos (I look like a fashion forward version of that girl in The Ring, right?), I took the dress off and plotted what I could possibly do to save it.
I am now pleased to present to you one of my most successful Tim Gunnings to date!
OK, so as I mentioned, the major issues with the dress were…well, the whole thing. It was too big, with too much material to make the cute wrap-tie feature work, and all the hems were wonky. To start, I carefully took out the stitching for the awful baggy neckline and I tried to apply a length of seam binding instead, hoping it would shrink up the stretched-out opening. That ended up looking even worse than when it was just folded over and sewed down. Because I had serged the neck binding, I considered it too much work to unpick all those stitches, since I wasn’t even positive that I could save the dress, so I cut the binding off, leaving the neck opening even WIDER. As a last resort, I slowly and ever so carefully sewed a tiny 1/4 inch hem around the neck, using my walking foot and a single needle and barely touching the material as it went through the feed dogs. The end result is…passable. Not perfect, but a far cry better than what I had started out with. The boat neck is so wide that I can’t wear the dress with a regular bra cause the straps will show, so I have to wear a strapless bra underneath instead. Not pleased about that, but it’s better than having to throw the whole thing away. The sleeve hems were thankfully a much easier fix- I cut out some fabric for bands a bit smaller than the sleeve opening, and they were inserted without any problem; they actually ended up looking really cute. Lastly I cut off the bottom of the dress because it was several inches too long, and I carefully sewed a very small hem with my walking foot; it turned out much less wavy than before.
Now for the actual body of the dress. This wasn’t too tricky since it is a knit fabric and pretty forgiving. I fixed the funky darts on the front so that they were a bit more even, I cut the wrap and ties off the sides, then I put the dress on my dressform and pinned the sides in so that they hugged the curves of the form instead of sagging around it. I reattached the ties right under the arms as the original design calls for and then I serged the seams from bottom to top. There were a couple of small adjustments I made to keep the side seams even and flattering around my hips, but other than that, this was probably the easiest thing to fix.
And there you have it; I Tim Gunned it! I made it work! If I could do the re-design all over again, I probably would have moved the ties down just a bit so they were more at waist level instead of right under the bust, and I would also bring in the side seams just a teensy bit more so that it is a little less roomy overall. But even as-is I am happy with this garment! I managed to wear it to some Behind The Scenes footage for our movie Suicide Kale (did I tell y’all about the movie I produced with my friends? This topic is waiting to be turned into a blog post titled TryCurious gets BEHIND the camera, but until then, you can find out more about the film here)! Thankfully the dress held up well and I felt great in it! Maybe I am not at the caliber of SO DAMN FLY that I was initially opting for when I envisioned this dress, but I am pretty close to it, and honestly, saving a #sewingfail from the garbage can kind of increases the intellectual FLY factor when you lay it all out on the table, right?
I recently wrote a two-part article for one of my favorite sites, autostraddle.com, about sewing. There is probably nothing new in it for you seasoned sewists out there, but for beginners and people who think they might be interested in getting started with sewing but have never done it before, you might find some valuable information! You can check out Part I which is all about sewing machines here, and Part II, about fabric, patterns, resources and inspiration, right here!
Blerg. I hate it when this happens. And it happens to me with regularity. It looked so good in my head but not so good in real life. But you reworked it nicely! No idea who Tim Gunn is though. TV personality? Have you ever tried double sided tape for your hems? I think there’s one that washes away called wonder tape. I used it and had no stretching on a pretty flimsy knit. BTW, I think I love your blog!
I would love to see your template… my waist is narrow… so excess fabric would look like a tire on me. Regarding your bra straps… you can sew a ribbon with snaps to the inside of your dress… see photo in link: http://cdn2.gurl.com/wp-content/uploads/2014/04/bratricks1.jpg
Hi Christina- not sure what template you are referring to- I wrote this blog post a long time ago so it’s not fresh in my memory. This dress has long gone in the butthole bin so I am not trying to salvage it, but I am familiar with the bra straps held in place by the ribbon with snaps at the shoulder seams. As much as I like the idea in theory, it’s just not very comfortable to me to have my straps spread so wide apart that they are practically coming off my shoulders, as they would with this dress (I’ve had RTW dresses that used the ribbon + snap trick for bra straps, and they only worked for me with certain designs). A strapless bandeau bra ended up working fine underneath the dress, but ultimately I had too many well-fitting garments in my closet to reach for this sewing fail very often, so it’s in a pile waiting to be salvaged for scraps.