Well, bless it! The sewing community has come through again with a rush of encouragement, appreciation, and smoke blown up my bum, this time in the form of an invitation to join the illustrious Refashioners Blog Tour! For those unfamiliar, the refashioners take on an annual challenge of refashioning some specific type of garment into something new and (hopefully) improved. My introduction to the group was maybe a year or so ago when the theme of the refashion was ” jeans”, which obviously conjures up all kinds of possibilities, and the sewing bloggers who participated did NOT disappoint! This year’s theme is “Suits Me” and you can only imagine my amazement when coordinators Portia and Elisalex asked me to join their talented group of contributors. Although I have certainly re-worked an old garment or two in my past with some mending or re-hemming, I don’t actually have any experience with completely revising a garment from top to bottom, and I wondered briefly if my skillset would translate at this level of talent. Fortunately, the thought was quickly replaced with “You’re trycurious, damnit!”, and I quickly wrote Portia back to thank her for the consideration and to tell her to please count me in!
First up? Finding my suit! This was the most time consuming part of the challenge for me, since I don’t buy much clothing at all other than shoes and am out of the loop with the good consignment and vintage shops in LA. My only parameters for the suit were for it to be inexpensive (which can be a real feat in price-jacked Los Angeles) and I wanted it to be made of a quality material, namely NO POLYESTER, which has a tendency to absorb funky smells easily and makes me sweat like a Trump supporter reading Black Twitter. I spent days reading Yelp reviews of vintage shops around the city and jotting down their addresses when, on a whim, I decided to drive to Out of the Closet, a well-known chain of thrift stores in the city whose proceeds go to supporting LGBTQ and AIDS affected communities. It’s clean and well-stocked and I walked straight to their rack of suits and rifled through the thirty or so they had on display; within 10 minutes I had found my match- a black and white birdseye 100% wool two-piece that was several sizes too big for me, leaving me what I hoped would be plenty of room to play around with. The suit cost only $25 and if memory serves correct, one of the tags said the suit was made in Malaysia with Italian wool. The designer tag said “Andre Vachon”.
I didn’t think long and hard about what was to become of this suit before I pulled out my seam ripper, I just sat down on the couch and began taking it apart while watching season 2 of Last Chance U. At the end of a few episodes I had a pile of fabric puzzle pieces at my feet and a smaller discard pile consisting of things like lining and pockets. I decided straight away not to salvage the lining because, although the suit itself was made of what seemed like a good quality wool, the lining was a cheap acetate that I wanted no part of. I saved the buttons, too, though they were also cheap. I was amazed at how complicated the innards of the jacket looked once the lining was removed. I had seen and worked on certain elements of tailoring a jacket like this from books and websites, but I had never seen the handiwork up close and personal before. So many interfacings and pad stitched hair canvas, my goodness! I got rid of what I could but kept the interfacing on the front pieces because I figured they would offer whatever I ended up making a bit more structure.
As I took the suit apart, a solid image of the suit’s potential began to take shape. Thanks to the awesome suit-inspired pinterest board that the Refashioners had set up, I had lots of ideas floating around in my head, but I also wanted to keep in line with how the suit originated. As I mentioned, I had never taken on this kind of project before, so maintaining some simplicity and honoring the original architecture of the garment seemed like a good vibe to follow.
What if I just slightly altered the concept of The Suit, which has a tendency to feel a little stuffy and buttoned up? What if I took The Suit and made it a little more casual, a little more comfortable, a little more current and applicable to the needs of my life and career (which, as a professional actor, has virtually no dress code whatsoever)? If you follow my blog at all then you know that this concept is not out of the ordinary for me, as I just recently finished making a Jacket + Shorts outfit that upends the classic idea of a tailored two piece. I wanted this new refashioned suit to do the same thing, but I had to adhere to certain rules, namely sticking with the traditional suiting fabric it was made of, and incorporating some of the original design details in the suit that would prove impossible to work around.
The idea of a kimono jacket suddenly popped into my head, which I heartily latched onto. Maybe because it was one of the most recent patterns I had added to my stash? Or because the kimono silhouette, relaxed and so easy to wear, seems to be everywhere right now? (Although kimonos have certainly been fashionable and culturally relevant for far longer than when us westerners got hip to them)! A kimono provided an interesting twist to the idea of a classic suit jacket but the two still felt connected to me- both garments look structured and traditional, and they both feel like cultural identifiers. Kimono robes, at least the ones I have worn, are so comfortable, yet something about those wide sleeves that jut out from the body look very presentational to me. Couple that with the elegance of the band that flows around the neck and down the fronts of the jacket- a band that has the same visual impact of a necktie, but of course, looser, and perhaps more inviting. The more I thought about it, the more I loved the beauty and symbolism of subbing a kimono for a suit jacket, but who is paying attention to symbolism when you’re trying to refashion a garment into something wearable?
I am, damnit!
Once I settled on the kimono jacket, it made sense to make myself another pair of pants out of the suit bottoms, but obviously a pair that would fit me well and look good with the larger frame of the top- perhaps something high waisted with a slim leg. So that was it- I had my design! Now I just had to implement it.
With all my fabric pieces separated from their siblings and the seam allowances ironed out, I cut out the paper pattern for my jacket (I used McCalls 7200) and tried to figure out how to use them with the meager amount of fabric I had. It really was like trying to solve a puzzle! Looking at the suit on the hanger in Out of the Closet, I thought I was going to have yards upon yards of fabric to work with, but once the suit was deconstructed, I had much less to play with. I pulled out a couple of yards of black tencel from my stash that LA Finch Fabrics had kindly gifted me over the summer and planned to use it to supplement what I couldn’t create with the wool.
It took a while, but eventually I came up with a plan for the pattern pieces. I didn’t have enough fabric to make a full sleeved kimono as I had intended, but I didn’t mind; instead, I would use suit scraps to apply binding to the edges of my short sleeves, giving it a more finished look. I used the fronts of the original suit jacket for the fronts of my kimono, and because I didn’t have much room to play with, I kept the front welt pockets and darts intact. The pockets are functional, though very thin (actually perfect for glasses!) and although I tried to fight the inclusion of those details at first, I quite like them now. I love that echoes of the original suit are still peeking their way into the refashion in unexpected ways, like the breast pocket/handkerchief slot at the top of the suit jacket- when sewn up into my kimono the breast pocket ends up as a shoulder pocket on me, but you know what? That’s kind of a cool design detail! I feel like it’s something Rachel Comey might utilize, haha. And of course I chose to highlight this detail by sticking a little matching handkerchief inside it, lest it go unnoticed!
I had to do a lot of hacking to make the back pattern pieces and yoke for the jacket work- I didn’t have any original suit pieces large enough to accommodate them so I halved the pattern pieces on the fabric I had left, added seam allowances, and worked with them as if the jacket had a center back seam. Easy peasy. I used my black tencel for the band since I didn’t have enough suiting fabric, and I really like how it softens the stiffness of the jacket, and, as mentioned earlier, gives a bit of a symbolic nod to a more traditional necktie which is usually paired with a suit jacket. I used french seams for all exposed jacket seams and serged the hem before turning it up and hand stitching it down.
The jacket came together relatively quickly and I’m not gonna lie, I was really feeling myself at this stage of the refashion! I was like ‘oh, girl- you GOT this! You have SKILLS and you are SLAYING this challenge!’
But then it was time to work on the pants.
Cue horror music ending with a blood curdling scream.
I have had some great success making pants this year! The Palmer Pletsch method of tissue fitting was super helpful to me once I moved on from stretch jeans to slacks, and, having successfully nailed down the fit more than once of my most hated pattern brand, BUUUURDA, I felt confident that I could tackle a suit refashion with no problems! Unfortunately I made the mistake of using a pattern I had not tested out before. The pattern I chose, Burda #118 01/2015, has pleats with a plain waistband in the front, and in the back, an elastic waistband gathers the excess material instead of darts, which is a look I have loved for a while but never attempted to create myself. I tissue fit the pattern pieces for the pants, hoping to achieve a slim fit in the leg, and once I was happy with them, I proceeded to cut out my suit fabric
Here is the
tragic retelling rundown of everything that went wrong how I Tim Gunned my pants:
- The fit of the original suit pants was gigantic on me, but when I deconstructed them I had much less fabric to work with than I thought I would, meaning there was little to no room for error.
- I eliminated the pleats in the front of the pants thinking that the wool fabric from my suit wasn’t drape-y enough to keep them looking right.
- The suit pants had back welt pockets that were impossible to work with because of their placement- I tried hard to integrate the pockets as-is into my refashion, but because I intended to have a gathered, elasticized waistband in the back, the bulky welt pocket openings wouldn’t lay flat on my body and looked ridiculous.
- I decided to get rid of the welt pockets and openings to accommodate my back elasticized waistband. Of course that meant I would have huge gashes in the fabric right on my butt, so I planned to construct large patch pockets to cover the cut fabric (I also interfaced the pocket openings and used my machine’s darning stitch to cover them and keep them from stretching out/ripping further).
- With pockets omitted, I constructed the waistband for the pants using the original waistband. I removed the belt loops and used my tencel as a facing for the waistband. I sewed one edge of the elastic to the side seam of one side of the waistband, then tried the pants on so that I could cut my elastic to fit my waist. One look in the mirror and I realized that the decision to gather the back waistband was bad bad bad. I should have known the fabric would look way too bulky when pushed onto elastic, given that I omitted the front pleats for the same reason. But sometimes you have to see it to believe it!
- I changed the design of the pants, ditching the elastic back waistband idea for a more streamlined look with darts in the back. Which meant that I now needed a closure for the pants (the previously planned elastic waist meant I could just pull them up- in theory anyways, but when I tested them out I could barely squeeze them over my hips)!
- Enter: two darts on either side of the center back seam, and I also opened a side seam so that I could apply a zipper (I didn’t use the original zipper that came with the suit pants as it was just a cheap, regular plastic dress zipper and I prefer metal zippers for pants).
- The addition of these design elements requires
a second a third a fourthan outlandish number of fit alterations of the pants, so I end up removing the waistband several times to do things like raise the rise of the pants, make way for a side zipper, change the curve of the waistband, take the side seams in (over and over again), cut up the waistband to accommodate all the changes, etc. This is where my waistband starts looking like frankenstein.
- I notice, not for the first time, that the waistbands of men’s pants have a center back seam, while literally NONE of the women’s pants I have worn/bought in recent memory comes equipped with the same. I can’t imagine why they don’t- a center back seam at the waistband means that if you want to give yourself or take away room in the waist area of your pants, all you have to do is open the center back seam and remove/add fabric to the seam without having to fuss with cutting the waistband up or opening the side seams. What gives? I am determined to remember this detail and cut all my future waistbands with a center back seam!
- I should have taken out some length at the hip line of the pants during my tissue fit phase, but it’s too late to do that now, so I keep bringing the crotch in more more more so I don’t look like I have a diaper on.
- Where am I? What day is it? Am I still working on these pants? What are pants??? What…is…life???
- WHAT ARE PANTS, I ASK YOU???
- The fit at this point is about as good as it’s gonna get, so I can now start focusing on how to cover up the horrendous slashes from the welt pockets in the back. I had decided that big patch pockets would cover them up nicely, but of course, because of the weird positioning of the welts which are very high and close to the side seams, this is easier said than done. On one side of the pants I am able to cover the welt completely with the large pocket, but I can’t seem to get it even on the other side without the slash from the welt peeking through on the side.
And here is where I achieve my proudest moment in this make. I spy the black designer tag from the inside of the jacket chillin’ on the edge of my cutting table- I saved it because I thought it would have been fun to position the Andre Vachon tag and my own TryCurious tag together somewhere inside of the garment, but now it looks like the perfect way to conceal the cut from the welt pocket. I fold the tag and place it inside of the pocket so that just the AV emblem is peeking out of the side, which perfectly covers up the cut and looks like a design element I have seen on a million RTW garments before.
Because the tag is black, it matches the wool fabric and looks intentional. I sew the edges down onto the wool to ensure that it won’t flip up and reveal the cut underneath, and for extra good measure, I sew a button through the pant leg to the top of the pockets, holding the open edge down. Because the cuts are so close to the top of the pocket edge, they have a tendency to slide into view and I want to make sure that they stay covered. This makes the pockets less functional, but I don’t mind, as I’m not a big back pocket user. Besides, the pockets were only added to cover up the cuts in the first place.
- I reattach all the belt loops around the waistband thinking they will help cover up some of the mad piecing together of this pattern piece, which has so many seams in it at this point that I could just refer to it as a quilt. Pants are tried on to scrutinize my handiwork. Belt loops are immediately removed because they look too distracting.
- I tack down the zipper tape, hand stitch a blind hem in the pants legs, and…I’m done? My pants saga is over? Could it be???
As a final result the pants are… not terrible! Ha! But of course there is room for improvement. The zipper on the side of the pants is wavy, which, in my experience, means the seams need to be stabilized with stay or twill tape. The big patch pockets on the back of the pants don’t look as bad as I thought they would (they remind me of the 70’s when all pants seemed to be extremely high waisted and pockets were positioned halfway up the wearer’s back!), but I am not crazy about the way that they peek out underneath the kimono jacket. This could have been avoided if the jacket was the length that I initially wanted it to be (a few inches longer), but of course I was constrained by the amount of fabric that the suit gave me to work with and I couldn’t squeeze any more length out. I ironed out the creases that were originally in the suit pants because I don’t like the way creases on pants fronts look on me when they don’t disappear into a waist dart, and I omitted the darts to keep the front looking crisp and clean. However I think they look fine without the creases, and I love the slightly tapered ankle length.
My last and final decision for this make was to add a belt for the kimono jacket, because the silhouette just looks way better to me when the waist is cinched in. Thankfully I was able to use most of the jacket collar for this piece (and it was already interfaced!); my pile of suit pattern pieces dwindled quickly- pretty much everything I had left was small or curved and I really didn’t want to have to make a belt comprised of 32 seams to rival my waistband, LOL.
As for the styling of this outfit, I have no idea what initially sparked me to pair it with this Esplanade Bra from Orange Lingerie, but once the main pieces of the jacket were completed and I was ready to try it on, it was the very first thing I grabbed from my closet (the strapless bra is gorgeous and since I have made it twice now, I am planning on blogging about it, but til then, know that this one was made with a kit from the wonderful TailorMadeShoppe’s etsy store) ! I’m sure it has a little something to do with the fact that I had just recently finished making the bra in a different fabric as a bustier to pair with a skirt (coming to the blog soon!), so the look was fresh in my mind. Either way, I tried it on and it immediately conjured up images of a 90’s Madonna, with her baggy suit pants and torpedo bra. The bra shows a fair amount of skin, so pairing it with this suit feels unexpected, but I still really like it. The lines of the front of the jacket do a great job of revealing just a tiny bit of the surprise that’s underneath, and it also ties in well with this Budoir For the Streets theme I have going on. For me, the idea of a kimono robe draped over a stately, beautifully shaped bra in pinks and reds is totally incongruous to the look of a black and white wool birdseye men’s suit, but surprisingly, the two together really work.
And that’s it, folks! I finished this project in record time, mostly because I was obsessed with getting it done as soon as I started working on it- I didn’t want to procrastinate and then be stressed out trying to problem solve at the last minute. I like my sewing to be fun and pressure-free! Plus, my job can take me out of town with little more than a day’s notice, and I hated the thought of being in the middle of this refashion with a deadline looming and then having to hop on a plane. As a whole, I am so happy with how this make turned out- I tried really to hard to create something that I would actually wear at some point in the future, not just something that would suffice for this challenge, and with that, I think I have succeeded. There are definitely some little things about the make that bug me, like, as I mentioned before, the pants pockets not being totally covered up by the jacket, and how there are lots of teeny tiny tears and holes throughout the wool fabric, which couldn’t be avoided- most of them came from the holes that were leftover after I carefully removed buttons, seams, welt pockets, etc. It’s just par for the course when you’re working with fabric that has already been manipulated into a garment. Fortunately, this just adds even more character to an ensemble that already has a pretty remarkable story. I feel so grateful to have been able to participate in this challenge, pushing myself out of my comfort zone and proving that I have both the creative chops and skillset to compete with the rest of The Refashioners, so here is a big thank you to Portia and Elisalex for believing in my abilities and inviting me into the fold- this has been such a blast and I feel very proud 🙂
Click here to stay up to date with The Refashioners 2017, see all the other inspiring refashions AND find out how you could win an amazing prize!