Posts

Starry Night Dress

It’s been a while since I said this but….this dress was a JOURNEY, hahaha!

I have a conservative but beautiful stack of Vogue Paris Originals in my pattern stash, most of which were gifted as Christmas and birthday presents over the years, which I am slowly making my way through. I think I may have 3 or 4 of these makes under my belt by now, and some of them have been easier than others, but all of them have been challenging. I have found that the sizing for these garments, save for the normal adjustments I make on patterns regarding length, is pretty spot on and don’t have as much ease and therefore require as much futzing as most Big 4s. BUT! The instructions can be INSANE to follow. Part of it is because the distance between construction methods and materials then and now continues to get larger as time goes on. For example, a lot of vintage patterns from around the 70s and before include the use of interfacing, but iron-on interfacing either had not been invented yet or wasn’t readily available to home sewists, so the instructions always account for sewn-in interfacing, which of course needs to be attached to a separate fabric facing. As a modern sewist I am often so used to just ironing woven interfacing onto whatever pieces need to be stabilized, whether it’s the facing or the actual garment, that I forget that those aren’t always what the instructions are asking for.

Another reason these VPO designs can be so tricky to sew up is because the designs are so unique that they require construction methods that are very strange/unfamiliar. VPO patterns are pretty special, created by famous clothing designers of yester- (and sometimes today!) year to recreate some of their  designs for the home sewist, and these aren’t just your everyday bodice and gathered skirt kinds of dresses- these have interesting details and often complicated construction techniques that up the ante of your regular sew-at-home outfit.

Image result for vogue paris original pierre balmain

So back to this dress. Pierre Balmain was a couture designer of women’s gowns and dresses and hit his stride in the 40’s/50’s/60’s creating voluminous skirts with “nipped in waists”, using luxurious textiles with embroidery and beading, but as you can see, this VPO # 1625 is a very wearable, simplified silhouette, which is why I was so drawn to it; without having an excessive amount of frills and pleats, it screams decadence! The woman who wears this is SO FABULOUS AND UNCONCERNED that SHE CAN’T MOVE HER ARMS ABOVE HER HEAD…AND SHE DOESN’T EVEN CARE! It’s not the most practical design, those batwing sleeves that keep me from reaching up higher than my shoulders, but then again, red carpet ensembles don’t really have to be, and I am crazy about the look. It’s kind of like a cape dress, but the cape isn’t free-flowing all the way around- it’s tacked down at the front and back waistline and the “wings” of the cape are only free underneath the arms.

I was gifted this gorgeous Star Print Crepe de Chine from The Fabric Store and was  overcome by a surge of inspiration when I unboxed it. The print, small white stars of varying sizes stretched out across a dark navy background, is eye-catching and subtle enough to not look twee but bold enough to feel really special. It has a crisp hand, and even though it’s very lightweight, it is opaque on the body and holds it’s structure really well- it isn’t drapey or silky (although the texture is very soft), and even though it’s listed as a crepe de chine, it has a very smooth hand and the textured effect isn’t very prominent. An idea popped into my head that I could use this fabric for one of my VPOs, but I kept talking myself out of it, thinking that it would be too lightweight to pair well with this pattern in particular. Eventually I decided to go for it anyways- once I realized that the pattern didn’t require a heavy or lightweight fabric, it just needed something that held it’s structure well, I felt confident that the fabric would translate beautifully, and thankfully I was right!

First I traced out all my pattern pieces and (thankfully) remembered to shorten the bodice, but it required some extra work. I’m not sure if I have ever seen lengthen or shorten lines anywhere on a VPO pattern except the skirt/pants, and because the bodice is curved on the bottom and has indents to make way for attaching the bodice to the skirt in certain areas, I had to create my own lengthen/shorten lines by redrawing the bottom of the cape a couple inches shorter, then truing the lines of the side seams. Easy peasy!

Next I got to working on the skirt. I had no idea how well it would fit as-is, so I extended my side seams at the hips- VPO patterns come in one size as opposed to nested with multiple measurements, so you can’t grade between sizes and instead have to take in or add extra allowance where you usually grade.  I also widended my seam allowance on the side seams of the skirt from 5/8″ to 1″ so I would have ample room for making adjustments if I needed to. Next I cut the skirt out, basted the front and back darts, then tried it on to see where it needed more adjusting. I brought the back darts in a bit more and toyed around with the side seams til the skirt fit well in the hip and butt area, then I french seamed the side and back seams. All of this was pretty standard fitting stuff for me, but I made one big mistake- I adjusted the fit the skirt without taking into account that the front has an overlapping button band, so when it came time to constructing this part of the design, my skirt fit me perfectly when the front seams met at center, but not when they folded over to accommodate the placket. OOF!!!! ROOKIE MISTAKE, J! Somehow, some way, I was able to fudge things and I ended up squeezing just enough room out of the back french seam to give me a tiny bit more breathing room at the waistline of center front.

This dress is designed to have a lining underneath it, but I was confused as to what it would look like and whether I would end up needing it (I have trouble reading ahead in patterns if I don’t have a 3D visual aid, ie. the garment, to refer to), so I just moved full steam ahead but used french seams everywhere that I could in the event that the lining didn’t work and the insides needed to be finished. Another thing I neglected to take into account when adjusting the skirt was making sure that my bodice matched up with the smaller waistline. The bodice is attached to the skirt at the front and back waistlines and then flows freely underneath the arms, but now my back bodice was much too wide to match up to it. I decided to sew a big dart, beginning at the neckline and extending all the way down to the waistline, to cinch all that extra fabric in, and it turned out beautifully- it just looks like the back was cut into two pieces instead of on the center fold, and the print of this fabric is very forgiving so it looks intentional.

The bodice, though very simple looking, has a very interesting construction. There is a V-shaped dart at the lower front center of the bodice to accommodate the bust area since the dress isn’t fitted at the arms and there are no side seams in this area. I had never created darts like this- they start at the apex of the bust and then pivot before trailing out towards the front center, and because they intersect at the button band, the placket overlaps at the darts. Sewing this dart wasn’t difficult, but the instructions were pretty rough, and the maker should have been advised to use a tracing wheel to mark the seamlines of the darts on both bodice pieces (since it’s not a typically constructed dart, they didn’t show the normal dotted wedge line on the pattern piece to pin together and sew closed). I had to take my darts apart a couple of times to get it exactly right, but once I did, the effect was really cool!

The back neck facing was meant to be cut out separately for this pattern (which was difficult to tell in the instructions- there was a pattern piece specifically for the interfacing but not for self fabric) so I just applied the back neck interfacing directly to the back bodice, which worked out fine except now I had to figure out how to finish the neckline since I wouldn’t be sewing the outer shell of the dress to separate facings. To be honest, I am still unsure of exactly how they wanted the neckline to be completed, since, as I mentioned, the front facings are not separate and are merely extended pieces of the bodice folded in on itself. This is what I meant when I said that sometimes with these patterns you just have to do what makes the most sense to you instead of adhering to instructions that may or may not be correct. I trimmed the neckline of my fabric, made some bias tape, then sewed it to the seam line, understitched, and folded over and under to enclose the raw edge and give a nice, clean finish, which I am very happy with.

Lastly came the lining, and because I wasn’t sure if I was even going to make one, I hadn’t purchased any fabric to use specifically for it. I dug through my stash and found some black organza that I thought would pair well with the qualities of my poly crepe de chine, and it just…wasn’t quite right. The organza was a tiny bit too stiff for the star print poly, and the poly also creates a lot of static, so the dress just clung to the lining underneath instead of gliding over it. Although I loved the way that the lining was meant to be attached to the dress (just at the button band and shoulders, and designed with regular bias bound armholes as opposed to mirroring the lines of the batwing sleeves), I had already finished most of the seams inside of the dress so I just decided to omit the lining and wear a slip underneath if I felt like I needed more coverage- in these pictures you can still see that I am dealing with some static cling wearing a simple silk slip underneath, but in all honesty, the slip is unnecessary.

I bought a few packages of inexpensive but really pretty gold-rimmed white buttons to use for the front of the dress and I think they look great- they don’t interrupt the print of the dress too much and flow well with the rest of the stars around it.

This dress was a LOT of work to complete and of course if and when I make it again I know a million things I will do differently (or not do at all!) but overall, I am pretty stoked at how it looks, especially after seeing these pictures. The print is dynamic but so is the fit- I don’t often see many structural sewing patterns like this and I love the silhouette, specifically that swoop from back to waist to hips and the flow of the sleeves floating off the sides. So cool! I really want to make a pair of bright yellow heels to pair with this dress- I think it would be a nice nod to the bright stars of the print, but I also just love yellow and navy together and think the color combo would be brilliant!

Again, many thanks to Lawrence and Claire, who art directed this photo shoot and came up with some of the most beautiful photos we have ever taken- you guys are a real dream team, we should do this more often!

 

Starburst Dress for Stylemaker Fabrics Blog Tour 2019

Hey hey hey! I am chuffed (can you tell I have British friends on IG??) to be a part of this year’s Stylemaker Fabrics Spring Tour! The tour is an opportunity for fabric lovers to be introduced to and inspired by all the new textiles that the Stylemaker Fabrics online store has to offer, and there have been some really fantastic makes on the tour so far!

I had a really hard time figuring out which fabrics I wanted to work with for my make- there were so many pretty colors and interesting prints that I could have stared at the fabric swatches for days, but then I stumbled across a new-to-me-pattern by Amy Nicole Studio called the Roksi Dress and felt a surge of inspiration. This dress has a simple but clever design- it’s basically three of the same garments of varying lengths layered over each other, so a knee-length swishy spaghetti strapped dress goes underneath a hip-length swishy spaghetti strapped tunic which goes underneath a belly button-grazing swishy spaghetti strapped crop top. Cool, right? I love how this design leaves so much room for playing around with color and print, love what an easy dress this probably is to wear and make, and I love how far you can stretch the pieces out for various looks…the pieces can be worn individually or together in various ways to create completely new looks! Thinking that this was the garment I was going to make, I spotted three different, very summery shades of tencel twill from Stylemaker Fabrics that I knew would look really lovely together, reminding me of a popsicle, or sherbert. Something summery and fun and breezy in the California heat!

Me trying to be in West Side Story

No sooner had I ordered my fabrics than I stumbled (it appears that I stumble around a lot on the internet) upon a version of McCalls 7894 that Bianca of Thanks I Made Them recently completed. I came across it because the McCalls instagram shared a picture of her make on their account and I! WAS! SMITTEN! I had not seen this Big 4 pattern before and if I had, I’m sure I would have overlooked it. For some reason the pattern envelope just didn’t call out to me in any way, shape, or form…however, with Bianca’s spin on it? WHOAH! I loved the use of color in her fabric choices, which made the whole dress feel like a day at the beach, and the style and fit were just so flattering, even with it’s weird waistline which dips down at the sides (not usually my cup of tea). Even though I had been dead-set on making the Roksi Trio, I was suddenly in the McCalls 7894 camp, and I imagined that my three cuts of fabric would transition beautifully into this dress. Ultimately I decided that switching these patterns was a brilliant idea because the Roksi Trio, while it would have looked great in my three sherbet hues, would be better served by playing around more with print and color than just color- every version of the Roksi Trio that uses prints and solids together stands out, and I would love to make this pattern in the future using some exciting prints from my stash!

So onto this here make…I was very out of Big 4 practice when I started this project. Because of my Family Crisis/December Hiatus and a busy work schedule in Jan and Feb, it had been a while since I had created much of anything, much less a Big 4 pattern I hadn’t sewn before, and I was out of practice. Because of this, I made a lot of mistakes that I normally don’t, but fortunately I was able to fix pretty much all of them!

First mistake: I pre-washed a bunch of new fabrics in one load (these tencel twills plus a couple more) and got bleeding on the yellow and peach cuts of my tencel twill (surprisingly the pink didn’t take the bleed). The bleed wasn’t super dark and it wasn’t completely covering the yardage, but it was definitely noticeable and annoying. I think forgot to put a dye catcher sheet in the wash when I was pre-washing these, but I shouldn’t have washed all the pieces together in the first place- this was totally my bad. Also, before anyone suggests in the comments that I should have used that smelly dye-remover stuff to get the spots out, I chose not to use it because I think the results can be ineffectual- when I have used it in the past it has gotten most of a dye bleed out, but never all of it, and it has faded the original color of the fabric I used it on, which I didn’t want to happen- the vibrancy of this tencel twill is one of the reasons I picked it out! As a result of the bleed, I had less fabric to work with because I had to avoid the areas that were dotted with blue. Stylemaker Fabrics very generously offered to replace my fabric, but I wanted to avoid that at all costs- I HATED the thought of wasting all that fabric and I was determined to make this project work with what I had. With some artful placement of my pattern pieces, I successfully cut out most of the dress without getting too many of the blue spots anywhere, although there are a couple of tiny, very inconspicuous places where the dye spills over- but I would have to point them out to you (and you know I’m not gonna do that!)

Next mistake: I totally forgot to grade out from my waist to hips when tracing out my pattern pieces, even though I do it on literally ALL BIG 4 PATTERNS I make, so when I tissue fit my pattern pieces onto my dress form, there was no ease whatsoever in the hips! Instead of recutting my pattern pieces, I decided to simply add extra seam allowance (via paper taped to the edges) to my skirt pattern pieces to accommodate the room I needed. Once I made those tweaks, I sewed the dress up, serging the insides close to the seam line to finish them since there are a lot of curves on the dress and I was afraid french seams would be too bulky. I basted the skirt and bodice pieces together and tried it on and…. I HATED IT!

Image result for hated it gif

It looked awful- ill-fitting, super frumpy, too long…issues I am used to addressing early on in construction with my pattern tweaks. Then I realized why- I had ALSO totally forgotten to shorten my bodice like I also ALWAYS do! What was wrong with me?!? I was such a mess! I didn’t have enough un-spotted fabric to re-cut my bodice so I had to take the easy way out and chop off an inch of the length from the shoulders to raise the dress higher. Of course this was not an ideal fix because it changed the drafting throughout the entire bust area, affecting the armholes and sleeves and making the upper bust area have much more room in it than necessary, but it was the easiest, most efficient fix and it isn’t too noticeable. To accommodate the raised/shorter bodice, I had to take out an inch from the height of the sleeves so that they would fit the shorter armholes, and I also had to extend the opening of the armhole below it’s original drafting so that they wouldn’t be too tight.

Completely separate from the bodice length issue but just as frustrating was the front bust area. It is designed with gathers under each side of the bust, and then it crosses over to wrap at center front, but on me, it looked hideous. Part of this was because I had not yet shortened the bodice, so the waist was way too low making my boobs look like they reached to my belly button (low swinging boobs might be in my future, but I am not there yet!). Beyond that, the look just wasn’t flattering on me- maybe because I don’t have a very full bust so the gathers had nothing to hold. Regardless of the why, I knew I wanted to omit this design detail. I contemplated trading them out for darts but ultimately saw that pleats worked much better, still giving me lots of ease and wiggle room in the bust and keeping in line a little more closely with the original design.

 

Those were the major mistakes changes I made to the dress- once I lifted it up by shortening the bodice, the skirt fit much better (it had initially been too low and wasn’t hitting my bottom in the right spots). Thankfully this tencel twill was a real dream to work with and the fabric was able to withstand a lot of hustle and bustle as I made major and minor changes to the dress throughout construction. I have always been drawn to tencel twill because it has a sandwashed look to it, a tiny hint of sheen that bounces off the fabric when the light hits it in the right spot, so it makes something that would otherwise look ordinary seem much more luxe. The weight of this tencel twill is also particularly nice- it’s got such a nice hand feel, and as you can see, the drape is terrific and pairs well with this dress. The fabric looks beefy without actually being heavy, and it took my sewing AND my unpicking beautifully!

This dress is only lined in the bodice, which makes it feel substantial and supportive while the skirt gets to stay light and breezy. I had been referring to this project as the sherbert dress as it sat in piles of fabric waiting to be sewn together in my craft room, but once I actually started construction I was amazed to see myself transformed into a package of starburst! In this dress I look like a trio of red, pink and lemon candies, and I am not mad at it one bit! This color combo still screams summer, just as I had hoped it would, and I think the choice looks really chic and fun without looking like a kindergartener (no shade to kindergarteners!)

This dress was a lot more work than I was anticipating (again, all because of my own mistakes), but it was totally worth the blood, sweat and tears- I love the overall look of this dress, and something about it feels a little bit vintage to me. I don’t know if it’s the poofy sleeves or the color blocking, but it looks ripped from a page of a seventies teen magazine, and I dig it, man!

Thank you, Stylemaker Fabrics, for inviting me on your fabric tour this year- I never would have made this dress without inspiration from your spring collection, and I know I will have a lot of fun wearing it out in the world! For this dress I used tencel twill in coral, yellow, and melon, and you can find more of the beautiful fabrics in the newest collection at Stylemaker Fabrics here! There is one more stop on the tour tomorrow, by none other than Michelle of Stylemaker Fabrics herself, and you can check out her make here!

Lastly, big thanks to Claire and Lawrence (BFF) for teaming up together to art direct and shoot my looks today- Claire is always a big help to me in documenting garments for my blog, but Lawrence’s keen eye for detail and enthusiasm in helping us stage everything was amazing- it was one of the most relaxing and fun times I have ever had shooting blog photos, which normally feel like a chore. I am so so lucky for you both, and thrilled that we got to work together like this- we gotta do it again!

Lawrence doing final touches LOL!

A Rigel Bomber for Claire

I make Claire stuff all the time- hoodies, binders, approximately 326 pairs of Hudson pants- but not all of it gets catalogued here on my blog. Mostly because getting photos of myself in my makes seems to take forever, so trying to schedule an additional person feels downright preposterous. But every once in a while, I make Claire something so radical that it’s essential to catalogue here, and this Rigel Bomber by Papercut Patterns is a perfect example.

Rigel Bomber

Although I’ve pinned and pined over lots of photos of their patterns, this is the first one I have actually ever made. Hilariously it was gifted to Claire through me (since Claire doesn’t sew), because our friend thought it would be a good style match for her, and she was totally right- this bomber jacket has all the athletic/leisurewear essence of the clothing that Claire is generally drawn to, with a little bit of design flare included.

I have to be honest- I wasn’t a huge fan of this pattern, drafting-wise or construction-wise, but I am not turned off of it enough to not try out another of their patterns in the future, and I do like the outcome of this jacket! Let’s start with the fabric and notions choices, which are probably my favorite part of the whole project, but which definitely took the most time to collect. Last December when Claire and I went down to New Orleans to celebrate our friend Geri’s birthday, we made a stop at Promenade Fabrics because I had heard of what a special store it was. I guess they weren’t quite ready for our crew when we arrived- we were like, 10 people deep, and we barged in on the quiet store with a lot of conversation and squeals of delight (mostly coming from Claire). I got the distinct feeling that the people manning the store didn’t actually think we were going to buy anything. But we did! And this beautiful print is one of them!

Of course Claire is the one who picked this out- it’s got her personality all over it: bold, bright, and totally unique. We had already decided that I would make her the Rigel Bomber but it was taking forever to figure out what fabric she wanted- nothing online caught her interest but she also wasn’t sure what she was looking for. When we walked the aisles of Promenade, she kept asking ‘would this one work?….what about this one?’ and not finding the exact print-to-textile match necessary, but then she found this random little bolt off to the side that caught her eye. We pulled it out and it was stunning! A galaxy print with a bit of embossing on the fabric, lots of silver, gold, yellows and reds. The fabric was expensive but they only had one yard left and although I knew it wasn’t enough to complete the whole jacket, I felt confident that we could supplement the rest of it with something really cool.

Back at home with the pattern pieces cut out I determined that we could get the back and front bodice pieces from the galaxy print and we just needed a different fabric for the sleeves…but what?? I glanced in a corner of my craft room and saw a big box of leather that I had just purchased for a steal from the Brooklyn Shoe Space instagram account. Sticking out of it was a soft, pliable chocolate brown hide that matched the reddish, brownish hues in the galaxy print. “Ever considered leather?” I asked Claire, and her eyes widened.

Once we had the main fabric worked out, I forged ahead. I didn’t muslin (yeah, yeah, I know!) or make any big adjustments, but I did redraft the front neckline to be more rounded- as designed it slants into a V and pulls down kind of low at the front, which I just don’t like very much- I prefer the more classic neckline shape of a letterman’s jacket. Next I re-drafted the facing to match the curve of the neckline of the front bodice, and I liked the look much better, although I could have raised the neckline higher and rounded it out even more. Weirdly, I got pretty stumped by the welt pocket construction…well, not stumped, per se, but dissatisfied. I wasn’t impressed with the techniques they used but I didn’t realize how strange they were til I was already halfway through them and it was too late to change it up. I don’t remember everything I disliked about the method, but I do remember that it lacked a lot of key information, like which direction to press the pocket bags and facings, etc. Pressing properly throughout welt pocket construction is one of the things that makes this design feature look really tidy and professional, so omitting it was a big oversight to me (FYI I really like the technique used in Closet Case’s Sasha Trousers).

I also disliked the size and shape of the pocket- it’s not very deep or long and it was kind of frustrating to sew. Part of it is because the jacket is relatively short and narrow, but I still think it could have a lot more room in the pocket without compromising the design too much. Thankfully the unattractive pocket and welt can’t be seen on the inside of the jacket because I decided to underline it! A regular lining would have been nice but because I used a thick material (leather) for the sleeves, I didn’t want to bulk up that area even more, so I just underlined the back and front bodice pieces with some bright green quilted polyester by basting the lining and outer fabric together and then sewing it as one.

 

Claire had purchased a zipper and a length of binding on etsy once we found her main fabric, but I neglected to tell her not to purchase from any accounts shipping from overseas, since they can take months and months to get here and it’s not the most sustainable way to buy. Spoiler alert: we are still waiting on her zipper from China and it has been THREE MONTHS lol! I ended up having to hunt down ribbing locally once I got to that step in the instructions, and I also picked up a really cool zipper, but lo and behold, when I got back home to use them, they were all wrong. The “ribbing” I bought from Michael Levine’s was actually more of a thin, lightweight, ribbed stretch knit- it was incredibly flimsy when I basted it onto the neckline of the jacket, and the color was also not quite right- a little too bright and orange-y to pair well with the galaxy print. And then! The zipper I got was too long! Which normally wouldn’t matter, but because this is a separating zipper it needs to be exactly the right length for the jacket front.

I took to instagram asking my followers if anyone had any beefy, sturdy ribbing to suggest for me that I could buy online, and Michelle of Stylemaker Fabrics wrote me with a link to the perfect ribbing that she carried in her shop. I bought two packages of waistband ribbing (I used the additional one for the neckband) and matching ribbed cuffs in a color that ended up being the absolute perfect compliment to the jacket- a deep purple-ish wine color that enhanced the purple in the galaxy print and was a nice pairing for the brown leather of the sleeves.


Next I looked on youtube for tutorials on how to shorten a separating zipper, and I found that I could remove some of the teeth with wire cutters and then cut the excess length, but I wasn’t sure how to close off the top of the zipper without an extra pair of zipper stops – apparently you can buy zipper repair kits at a local fabric store, but I wasn’t planning on leaving the house for the rest of the night so I was determined to figure it out with the tools I already had. Somehow, someway, I convinced myself that if I was careful, I could pull the stops off the orginal zipper with pliers and then close them back onto the zipper where I needed them to be, right below where I had cut off the teeth. It took a while and a lot of muscle, but I did it, and it was totally worth it- this zipper is just too cool to not be attached to this jacket.

Because I opted to use leather sleeves for this project, I had to be flexible with a lot of the construction methods- it would have been quick and easy to serge almost the whole jacket, but I can’t run leather through my serger, so I had to sew straight stitches with Nylon thread (which holds up better when sewing leather). I also had to try and reduce bulk in as many places as possible, sometimes skiving the leather down at intersecting seams, sometimes using my mallet to pound the seams flat or open. Using leather took a little bit more time but I adore the look is brings to the jacket.

Another design element I didn’t like so much was the facing, or rather the fact that the facing isn’t instructed to be tacked down inside the jacket around the zipper. On this jacket, the facing constantly wanted to fly open or get scrunched up inside the jacket when it was being put on, and tacking it down was easy since I underlined the outer shell, but on a single layer jacket, depending on the fabric, this might be a difficult thing to do.

This jacket was literally four months in the making but I am glad I kept working on it because it looks really freaking cool and it’s SO CLAIRE! I am hoping that the leather of the sleeves softens up more over time because as of now, even though the leather is soft and pliable, it’s still pretty thick and it needs to be broken in. If I made this again I would probably lengthen it a bit and round out that collar even more (and alter that pocket bag shape!), but I think it fits Claire well and is a beautiful collaborative effort on both our parts. Enjoy, Claire- I love you!

 

 

Boiler Suit Pattern Testing

I’ve never pattern tested before because I like to limit my “deadline sewing” as much as possible. Sewing with the pressure of a due date takes the fun out of the craft for me, so, with the exception of being an ambassador for The Fabric Store and sewing up holiday gifts for others, I just don’t do it very often. However, sometimes my trycuriosity gets the better of me and I will say yes to things I haven’t done before so I can at least have the experience under my belt and know whether I like something or not based on knowledge instead of assumptions. When Alice & Co. reached out to me on IG and asked if I was interested in testing their new Intrepid Boiler jumpsuit pattern (how did they know I was on a major jumpsuit kick???), my instinct was to say no, but then I saw an image of the design. It was essentially the Madewell one-piece that inspired this jumpsuit, the one I saw Heather Lou in, fell in love with, and then consequently tumbled down a jumpsuit rabbithole in an attempt to recreate it! If you read that blog post you’ll know that I diverged from my original inspo and, while I love where I landed, it’s different from the utilitarian, no-frills jumpsuit that first caught my eye.

Well, surprisingly, the Boiler Jumpsuit ended up being the answer I needed all along! And now I am glad I didn’t waste too much time trying to cobble together a pattern for it because this one is surely better than what I would have been able to hack. This jumpsuit was a relatively simple make, although there are of course some changes that have been made since the tester versions went out. I think the majority of the changes address design details as opposed to fit details, and my jumpsuit fit really well right off the bat.

The tester pattern was comprised of sleeves, a yoke, front/ back bodice, pant legs and pockets, and the waistlines of the bodice and pant legs have extra seam allowance included so that you can baste the pieces together and decide how much or how little room you need for comfortable bending and moving around. You know how some indie pants patterns give an inch of seam allowance at the side seams so that you can adjust as needed throughout the hips and leg area? Well this pattern allows you do that when connecting the top and bottom of the jumpsuit and it is super helpful to have included. Since the general fit of the jumpsuit is loose, the length through the torso and waist was the only area I needed to adjust, and the extra seam allowance makes this very straightforward and efficient.

I was surprised to see that there were no side, slant or patch pockets included in the tester design, and I had no idea how much I was going to miss them til the whole garment was completed and I tried it on and realized that my hands were aching to be jammed into something (that’s what she said); the jumpsuit is just so functional looking and utilitarian that to wear it without pockets felt wrong- where will I put my tools? My candy cigarettes? My lovenotes?? So I went back and added patch pockets to the front legs of mine after it was already finished, only because they were simpler and quicker than taking the legs and waistband apart and drafting a whole pocket. I think the patch pockets work fine on this (I used the pattern pieces from my Madewell hack) but a regular side seam pocket would be great, too.

Unfortunately I can’t speak much on how well the instructions are written because the ones for the tester version were sparse in a couple of places and they said they added more information but I’m not quite sure what they look like; I used the burrito method when attaching my yoke to the bodice pieces (they used a different method in the instructions) and unfortunately they left out the zipper installation instructions for the tester pattern (which they said will also be included in the finalized pattern). The zipper is where my only real issue with this pattern came into play. There was literally nothing about how to attach the zipper to the front pieces, so when I came to that part of the construction I decided to forgo the zipper altogether. The front zipper was my least favorite part of the jumpsuit design, only because, at least for the tester version, there was no hidden placket or flap to conceal it, so it was just a big zipper going from crotch to neck. As I’ve said, I love how practical this garment is, but I felt like the zipper made it look a bit too simple or costumey- for me it was just missing some element of sophistication. I decided at the last minute to draft some front facings to each bodice piece so that I could fold them in and use snaps to close the garment up instead of the zipper.

I wish I had taken better notes on how to achieve this look because, although Alice & Co. loved my finished jumpsuit and told us testers that they were going to include some button/snap placket options to include with the zipper, I just found out that they thought the placket was “too complicated” to include in the pattern and they decided not to add the option after all. I beg to differ on this point since I was able to figure the placket out on my own and I am by no means a designer- I think that with the proper instructions, a beginning sewist could just as easily create a beautiful placket as they could a front zipper, there are just more steps. I must admit, I was disappointed to find that they were leaving the placket option out of the pattern because they seemed so excited about it at first and it felt like my most significant contribution as a pattern tester. But then this morning they sent me an email saying that they might offer the plackets as a hack to be released in the coming weeks, so I will keep my fingers crossed that they offer that option up to future makers of the pattern.

I can’t remember exactly what I did to create my front button plackets but it wasn’t very scientific anyways. I modeled it after another jumpsuit I made (hasn’t made it to the blog yet) which has a front button placket. Essentially I drafted two facings for each side of the bodice that extended from the crotch to the neckline which were about 4 inches wide, interfaced them, sewed them to the bodice front edges, then I understitched them. Because these pieces were not drafted and taken into account from the beginning of the make, they aren’t lined up perfectly in the center of the jumpsuit, and the overlap of the bodice fronts is pretty narrow- there is only like an inch or so of overlapping fabric underneath the snaps, but it was still plenty of room for me to attach them. If I had known I wanted to add these plackets from the beginning of the make, I would have extended the front bodice edges out a couple of inches so that they overlapped instead of met at the center (a zipper means each edge will meet together roughly in the center, with the zipper taking up a little bit of space, but for a placket, the pieces are drafted to be wider so that they can overlap, if that makes sense- you need the right and left front bodice edges to sit on top of each other so that a button or snap can be attached to both pieces of fabric and connected).

On the bottom of the crotch, after snipping into the seam line to allow the facings to be tacked down to one side, I topstitched the edge of the placket onto the front of the pants to keep it in place. I also extended the collar just a bit to accommodate the adjusted neckline. Lastly, I extended the waist band pieces further towards the front center of the jumpsuit and I inserted a length of elastic inside it and sewed it down on the fronts and side seams. I knew I would never style this jumpsuit with a belt the way that the pattern photo showed, but I also knew I didn’t want the waist to be totally loose around my body, since there is a a lot of ease drafted into the pattern. I left the elastic pretty loose so it doesn’t hug my waist but it cinches in enough to make me feel like I am not wearing a tent. Aside from shortening the lengths of the sleeves and pants legs to fit my petite frame, those are the major adjustments I made to the pattern.

All in all, I really love how this jumpsuit came out and I think it’s a dead ringer for the original Madewell jumpsuit (above) that I fell in love with, except this one actually fits me. My favorite thing about the design of this garment (besides the great drafting) is the collar- it’s a very simple one-piece collar, nothing particularly special about it, but I think it works so well on these coveralls, and I wish I had made my dusty rose jumpsuit with this collar instead- next time!

Although I absolutely want to make one of these jumpsuits in a lightweight yellow twill like the Madewell inspo one, I like how this striped linen (gifted to me by Mimi G…and by “gifted” I mean she let me rifle through her shelves of giveaway fabric one day lol) works with this pattern- I knew I was toeing the line to have it look like a prisoner’s uniform with the vertical stripes and subdued color, but it doesn’t look nearly as drab as all that. It’s really fun and easy to wear and I have had NOTHING but compliments on this thing every time I wear it. I have dressed it down with my memade sneakers (as seen in these photos) and I have also worn it with clogs which made it feel slightly more dolled up- there are a lots of cool ways to style this garment and I am excited to discover more of them (I’ve always wanted to wear something like this with a t shirt underneath and the top half off with the sleeves tied around my waist! It’s like Car Mechanic Realness!)

As for whether or not I will ever pattern test again? Who knows! Maybe if it’s for a design I am super excited about, like this one, or a pattern company I love. Alice & Co. was friendly and gracious throughout the process, and despite my disappointment about them not offering more options for the final version, I think the jumpsuit is a great pattern and will be fun for beginning and intermediate sewists alike. The real question is… has my my thirst for jumpsuits finally been quenched?!

Dotted Named Outfit with Slate Leather Flats

As mentioned before on this blog, Named is not my favorite indie pattern brand. They have some great looking designs and I love their styling, but the drafting and instructions generally leave me always desiring more. Sakijane describes her complaints (which happen to mirror every single one of mine) very succinctly in this post about her most recent Kielo Wrap Dress and I felt so validated when I read it- I was not alone in my disappointment with their patterns! But I also know that there are tons of talented makers out there who love Named and have lots of successful garments to show for it, so when I saw Katie of What Katie Sew’s 100th pair of cute Ninni Culottes, I decided to take the plunge and get the pattern myself. For one thing, this pair of pants seems like a good staple to have in my closet- elastic waist and cropped legs scream nothing but comfort to me, and I like that it can translate from houseclothes to streetclothes pretty seamlessly. I also figured that I wouldn’t have any issues with the construction methods since it’s such a simple design. I was (mostly) right on both counts!

As soon as I saw this organic cotton jersey from The Fabric Store, I knew I wanted to sew it up into something coordinating (I got yardage of both the white and the blue dotted, but as of this blog entry they seem to be out of the blue- if you’re interested in this fabric I would keep checking back since they restock frequently)! I knew I wanted the culottes in the blue dotted but I wasn’t sure what to pair the white with for my top half- I liked the idea of a boxy crop top but I didn’t have any patterns like that in my stash for knit-specific fabrics. And then I remembered the Named Inari Tee Dress pattern. I’ve had it for years and the one time I tried to make the dress, it was a disaster on me- not suited for my body at all and very unflattering. But I had never given the tee a go, and the tee seemed like it would be much less tricky to make work on my body. The pattern is suggested for wovens or fabrics with a light stretch, which my jersey was not, but I thought it would work just fine since there is no negative ease drafted into the pattern.

Both the pants and the tee came together very quickly. The pants have deep side seam pockets that attach to the top of the waistband, and I cut out the smallest size since Named tends to run big on me. The only issue I ran into is when I tried to fit the waistband. As with most elastic waist garments, I measured out the amount of elastic that felt most comfortable and then fed it through the tube of the waistband. But it was very difficult to feed the amount of elastic I wanted through the pants and have the waistband lay right- it was like the waistband was too long for the short amount of elastic I wanted, so the fabric was bunching up and squeezing together all over it. It’s kind of hard to describe, but it just felt like the waistband was too big and needed to be made shorter. But I couldn’t do that without taking the whole pair of pants apart and taking out width from the top of the legs. So I left it as-is, trying to make the waistband as smooth as possible as I sewed the zigzags around it that keep the elastic stable inside of it’s casing. It looks a bit lumpy and bumpy to my discerning eye, but you definitely can’t see it thanks to the dots on the fabric, which cover up any inconsistencies.

After all that, I think the waist is still too big on me- the pants ride down, particularly in the back, and I have to keep pulling them up on me- I almost wish these had belt loops, which totally defeats the purpose of an elastic waist, lol. But I’ve still worn them a lot and think they are really cute! The next time I make them I am going to take at least an inch of width from each of the pants legs, plus the waistband, and see if that makes them fit me a bit better.

The tee shirt had issues, too, but it wasn’t because of the drafting. I wanted to add a band around the bottom edge of it because without it, the hem looked a little stretched out and haggard (again I think this is because there was no negative ease in the pattern and the hem isn’t intended to fit around the waist or hips of the body to help pull and stretch it out, it’s just kind of floating around my rib cage willy nilly). As you probably know, when adding a band to the edge of a neckline or the hem of a sleeve in stretch knit fabric, you usually need to cut the band a bit smaller than the opening you are attaching it to so that the band will ease in the stretch of the fabric and lay properly. If you cut it the same size, the hem will look stretched out and wavy. I applied this to the bottom hem of my shirt, but I slightly miscalculated the measurement so that the band was a tiny bit too small for the hem. The result of this is that there is a bit of wrinkling where the band is eased in too much in a couple areas along the seam. Again, not a glaring mistake, but definitely something I notice and frown at every time I see it.

As a whole, I love the silhouette of this outfit- I love the loose fit of both garments that somehow manage not to swallow me up thanks to the break that the crop top provides by showing a little of my belly. I love the matchiness (that isn’t too matchy) of the complimentary dotted fabrics, and I love how comfortable it is. Although I made these pieces to go together, I mostly wear these pants with a non-cropped t shirt (which helps the pants stay up on my waist) and a jean jacket, and I really want to pair this crop top with my Persephone pants at some point, because I think it will have a similarly interesting silhouette.

OK, so on to the shoes!

Rachel of RachelSeesSnailShoes (she is my unaware and unofficial mentor, LOL) has so much shoe inspiration on her IG, and my pair of shoes was inspired both by one of her designs and a RTWpair I found on pinterest by Rachel Comey.

Ultimately I changed the design a lot as I was working on the lasts, but I love the journey that I took to get to where I ended up, and they fit pretty great! They are comfortable, and the straps stay on my feet, something I always worry about when I don’t use buckles on slingbacks. Interestingly, the slingbacks tend to slide off the back of my foot when I’m sitting down, but when I’m standing and walking, they stay perfectly in place.

I used a patent leather from The Fabric Store in LA that I got many months ago and I love it- its a cross between gray and blue, not too loud but not too subtle either, and I think it makes a pretty cool neutral. I also decided to line my slate gray leather with a thinner cut of leather so that I could put a toe puff in the toe of the shoe. A toe puff gives the foot of your shoe some extra rigidity and keeps the shape of your toes from imprinting into the leather as you wear them over time, and I am very happy with my decision. They aren’t always necessary, but they can make your shoes last longer depending on what kind of upper leather you are working with.

The last time I made a pair of patent leather slides (which sadly I never blogged here so I can’t link to them, damnit!), they came out okay but there was a lot of room for improvement. My heel hangs off the back of the shoe just a tiny bit, which I HATE (the last fits my foot but the upper must be a bit too narrow in the toe resulting in the back of my foot sticking out of the shoe) and the lasting around the toe leaves much to be desired. You can’t see it from the top of the shoe, which is great, but if you look closely and the bottom and very front, you can see that there are wrinkles and folds and it’s not very smooth at all. Thankfully I have gotten much better at lasting this tricky area and the toe on these shoes looks damn near perfect, at least for my skill level.

The lasting process around the toe usually requires a lot of patience and hand strength from me, and I almost always slam my thumbnail with the hammer at least once getting those little nails all around the edge. But I can see how well my patience pays off when I look at a pair like these and see that it doesn’t have a handmade look the way some of my older pairs do- and nothing is wrong with a handmade look because…well, they ARE handmade! I just like to see concrete evidence of a learning curve, to see that I am growing and getting better and feeling more confident in my construction and design!

I am very happy with these shoes and excited to get started on my next pair, which will probably be using the beautiful new round toed lasts I just bought from I Can Make Shoes. They just stocked their online shop with some really cool block heels and I bought a couple pair for future use and I am just itching to get started. The only thing holding me back is trying to narrow down what design I want to use and that feels like it could take months! Wish me luck 😉

The White Kiki Party

All my posts are being shared out of order because I made several things over the summer months but was too lazy to photograph any of them until recently, so now I am trying to balance them out with things I am currently making and I am getting all turned around. But it’s okay! Please bear with me as I trudge through these clothing makes in the most (un)timely fashion!

To catch you up, Claire and I went to the wedding of our good friend Lawrence in Hawaii this summer, and it was our first time on the island of Oahu, which we were very much looking forward to exploring, but Claire started getting sick days before our departure and by the time we landed she had what turned out to be a full blown ear infection that was slowly making its way to her sinuses and throat. It was ROUGH for Claire, she was in a LOT of pain and discomfort, but thankfully we didn’t have much planned outside of the wedding events so she could be miserable in peace. Luckily, our airbnb was a 3 minute walk to a practically private beach, so I still had a lovely time hanging out with the sand and sun while I took breaks from looking after Claire.

The day before the wedding there was a “White Party” on Waikiki that all the wedding guests were invited to, but the name of the party was changed to the “White-kiki Party” at Claire’s urging, LOL. We were of course all invited to show up in white attire, and I had one dress in my closet that would have worked for the event but decided to make something new for it because…WHY NOT? Claire also needed something white to wear for the party and she settled on a Kalle shirtdress with popover placket in a terrific white linen fabric from Joanns. Claire is mostly a jeans and t-shirt kind of gal but my goodness she LOVES her housedresses, and she wanted something that felt comfortable and looked clean and classic to wear to this event. I opted for something a little more dolled up (surprise!) but still comfortable and breezy for the warm island weather.

When The Fabric Store closed in LA over the summer I got my hands on as much fabric as I could, which is why my stash is bigger than it has ever been before (a big stash is not my happy place, but I also can’t turn down good fabric that’s free or deeply discounted, so I have committed myself to not buying any more for the rest of the year so I can work through what I have…although I might need to amend that to next year after going through Mimi’s fabric giveaway pile yesterday lol). One of the cuts I ended up taking home with me was a white poly with animal stripes embossed across it. Because the whole print is white, it doesn’t really read as animal print (which I am not really into) but it gives the fabric a bit of depth and a texture, and I decided to pair it up with McCalls 7778, a jumpsuit/dress with options for different straps and closures. It’s a very simple garment to make with princess seams at the bodice, and I only needed to make some minor adjustments to it (surprise! it was too big right out the envelope!) to get the fit just right.

I actually had a bit more trouble with the legs of the jumpsuit than anything else because the crotch was just too high which gave me dreaded camel toe! It was a simple fix though- I sewed about 1/2″ past my seam allowance at the bottom of the crotch curve, grading to the regular seam allowance at the front and back waist, and now they are much better than they were, although if I made this pattern again (which I doubt I will), I would absolutely adjust the crotch areas on both front and back pattern pieces to give myself more room for my seat. As it stands, the crotch is still a bit too high for my preference, and you can see the fabric hugging my shape in the butt area more than you should for a flowy, gathered waist, culotte-style garment.

I also had to adjust the bodice pieces (which was to be expected) to make them smaller- it gaped out at the top of the bodice and was too loose under the arms, so I brought the seams in in these areas on both outing and lining of the bodice and it fit better. I pulled a real rookie move when I absentmindedly used my pink chalk pen to mark all my notches and circles on this white fabric, which of course showed through to the other side and wouldn’t rub off when I tried to remove them. I have other marking tools like Frission pens and invisible markers, I just use the chalk so often that I didn’t even consider how it would work on this white transparent fabric! Thankfully when I completed the garment, I threw it in the wash immediately and it wiped out every trace of the pink chalk.

Again, this was a super easy make- no pockets included, which I would have loved to add myself but I didn’t have quite enough fabric leftover after my pieces were cut out, and on top of that, the white poly is a little bit sheer and having pockets underneath it would have made them show through in a way that I am sure I would have been unhappy with. As a whole I feel pretty meh about this project. It came out fine and I was happy to wear it to the White-Kiki party, but there just isn’t anything all that special about it. The fit is nothing spectacular and the silhouette is definitely cute, but maybe paired with this fabric, which isn’t all that dynamic, it just landed a little flat for me. It’s not even the solid color that makes it feel boring, because I think this would have looked even nicer in a plain white linen. But I also think it would look cool in a statement fabric where the print takes centerstage. I’ve worn this garment several times and I always get lots of lovely compliments on it which are appreciated, but it’s just not my favorite make.

Now before I move on, I want to say just a little bit about my shoes! I didn’t wear these to the White Kiki party because I hadn’t made them yet, and I have a ‘no heels in Hawaii’ rule anyways, but I think they look really good with this jumpsuit so I figured I would do a 2-for-1 since I always neglect to do full blog posts for my shoe makes here (gotta get better at that)! These are the first pair of shoes I made from a pointy toe high heeled last I found at Saderma several months ago. Finding lasts is always tricky because once you find a pair in your size, you wont know if they actually fit your foot well until you make them, so there is always a little risk involved, and unlike clothing, you can try them on for fit throughout the making process to ensure you are on the right track. I have had a few pairs of lasts that seemed like they would work great for me but ended up being too big or too small, so I really lucked out with this pair!

I got the “snakeskin” leather (it’s just embossed) from The Fabric Store quite a while ago and was excited to make this style shoe with them once I got my hands on these lasts. High heeled slingbacks have been a little tougher to find in RTW than I anticipated so I figured I might as well give them a try, and I think these came out great. One thing I want to do on my next pair of heeled slingbacks is to use elastic at the buckle. If you have a pair of slingbacks, take a look at where the buckle is attached to the leather- there is likely to be a small strip of elastic connected to the buckle and leather which allows your foot to move around in the shoe without feeling too constricted and allows the strap to move with your foot. These heels are totally fine without the elastic because I am able to put holes for the buckle wherever I want them, but ideally the strap just adds a touch of comfort to wearing a shoe with a strap and it helps keep that strap in place.

I am still working on getting my heel completely attached and flush to the bottom of the shoe and this is my most successful pair yet, although I do have room for improvement. I seem to always choose a slightly-too-thick leather to cover my heels with which makes getting the top of the heel flat very difficult, but these came out pretty okay, and I like the contrast of the purple lining leather peeking out of the inside and bottom of the shoe. And they are comfortable! Well, about as comfortable as wearing 3 inch heels gets, hahah. But you know how when you buy new heels (if you wear them), they tend to take a little time to break in and form to your foot? Well my memade heels so far are not like that- they are softer than RTW shoes and feel pretty much the same the first time you wear them as the 2nd and the 10th, which is pretty cool. Still have a lot of distance to cover with shoemaking but I can definitely see that I am on a steady incline UP!

Okay, so back to the wedding…

you can’t take me anywhere.

Claire ended up being too sick to come to the Whitekiki party so me and my friend Kelly went together, and we BOTH happened to be wearing white jumpsuits, and we got to rock them while I drove the WHITE Jeep we rented for the trip! We were SOOOOO STYLISH! And the party was a blast! After some food and mingling with all the other guests, our little corner of the park was set up into different stations where we each got to learn from a local a little about Hawaiian culture and how to participate in a traditional luau. Me and Kelly’s favorite station was of course the hula, and we learned the song “Pearly Shells” while dancing to the music Lawrence’s friends played on their ukuleles. The night was beyond magical as the sun set over the ocean and our voices floated above us- the only thing missing was Claire! But I sent her lots of videos and pictures and she was at least able to make it to the actual wedding the next day.

Thanks for being my date, Kelly, and thanks Lawrence and Q for such a fun party!

The Kelly Dress

the cast!

This summer I was in a short film that my friend Kelly produced and also starred in, and we had a crazy amount of fun. Although me and Kelly have been friends for several years, this was our first opportunity to work together, and I appreciated us to getting to know each other in a new way through our “work” modes. Although short indie films almost always have a wardrobe supervisor, they tend to try and pull from an actor’s own closet whenever possible, which cuts down on costs and time since they won’t have to buy anything new for an actor and they know that whatever the actor brings will fit them and not need alterations. My character wore a cream colored pair of Ginger Jeans and a Grainline Hemlock Tee (it’s a free pattern!) pulled from my closet, of course, and Kelly brought in a white RTW button down dress that she found at the mall. I loved this dress as soon as I saw it on a hanger and I loved it even more once I saw her wearing it. It was a very simple design, but still not one I had seen out in the world very often. It had a fitted darted bodice with short sleeves attached to a gathered skirt, large buttons going down the front, and two big patch pockets on the sides. Needless to say, I immediately started dreaming up my own version!

You would think that such a simple silhouette would be an easy pattern to track down, but I had a really hard time finding exactly what I wanted (I made this dress several months ago, by the way), and ultimately it seemed easier to just hack something I already had. It took a while to figure out which pattern to use the bodice from- again, such a simple design and fit, but I couldn’t find a bodice that also had sleeves I liked. I decided to go with the Holly Jumpsuit from By Hand London, a pattern from my stash that I tried making for myself years ago with no success. I had issues getting in and out of the garment since it has a side zip that was still too short to accommodate my hips fitting through the waist circumference, and I wasn’t skilled enough at the time to know any other way to make it work. The bodice was exactly what I wanted for the Kelly Dress- it had a bust and a waist dart, roomy sleeves, and a front button placket opening.

I used a gorgeous pink silk linen from Blackbird Fabrics as both my fashion and lining fabric and got to work on making the adjustments necessary for the bodice- mainly I wanted the button band to be wider, which I also needed to adjust to attach it to a skirt that would also have a button placket (the original Holly Jumpsuit  design has a bodice that attaches to a closed-front waist). I sewed up the bodice first without the sleeves to try it on for fit and realized that the back was puckering up around my shoulders and neck (which it also did the first time I had made it!) so I had to add a small dart at the back neckline on each side.

Next I attached my sleeves and was really disappointed to see that they did not work on my body at all. The sleeves were super tight and the fabric was stretched taught across my bicep. Now, to be fair, I do work out, but to be even fairer, I only use like, 3 pound weights in my body sculpt classes, so I’m not the Incredible Hulk or anything! I am unsure why these sleeves were so tight since I have made other BHL patterns with no issues at all, and was stumped on what to do to fix them- I wasn’t convinced that giving the sleeves more width would resolve the issue since the sleeves were making the whole bodice sit awkwardly, even in areas where it seemed like the tight part of the sleeves wouldn’t affect it. I thought maybe the whole bodice needed some kind of adjustment around the arms/bust, but then I remembered that when I tried the bodice on without the sleeves, it fit almost perfectly. So I saved myself the headache and left the sleeves off the final version. Although I love the look of the sleeves on the dress, it wasn’t what originally caught my eye about the garment, so all was not lost.

Once I got the bodice looking how I wanted it to, I attached it to the skirt of the Jessica Dress by SewDef Patterns, a dress I absolutely love. It’s basically just three rectangles sewn together with a button placket in the front center, but that’s all I needed! In hindsight, I could have gone with a skirt that had less gathered material at the waistline (my skirt is fuller than Kelly’s, and I actually did take out some of the width of the pattern pieces of the Jessica dress for this hack and it still came out this full)  but I was too lazy to try and find another skirt in my stash that had this shape. I attached the big patch pockets to the sides of the skirt, sewed the top and bottom halves together, and then worked on my button placket.

Aside from getting the bodice to fit right, the button placket was the only other thing to give me a lot of trouble. It’s because of the silk linen I used, which was easy enough to sew regular seams with, but once it came to top stitching, the fabric had a hard time staying put. It would gather and gape and stretch and pull, even with my walking foot, and I had to take the stitching out more than once to get everything lined up and looking clean. It’s fine- not perfect, but fine! The stitching on the button bands is a little bit wobbly and it’s even more apparent because I didn’t use a thread that was super close in color to my fabric, but I’m not pressed about it- the 3 foot rule applies beautifully to this make!

This is a pretty great and easy dress to wear- although it was drafted to fit very closely to my body, the linen softens and relaxes very quickly so that it has a slightly roomy, loose fit around the waist without looking like it’s hanging off my body. I LOVE the big pockets and how they look on the dress, but they are SO big that the tops tend to collapse a bit, something that is also owed to the beautifully soft, drapey fabric I used. I keep debating whether or not to add buttons to the top of them and attach it to the skirt so they will stay closed, but if I do that, I won’t be able to stuff my hands in my pockets, which is pretty much the only thing I want to do when I wear this dress. Speaking of buttons, I bought these at my favorite store, Button Button, in Vancouver last year and I am so glad I found a great project to put them on! They are copper colored like a penny, and have a really cool graphic design on them, and I think they liven this simple dress up a lot.

These photos were taken at Hearst Castle when we took our friend Lawrence to the estate for the first time- he had never been before and Claire and I have gone multiple times, so we thought it would be a fun trip! We did our first night tour the day before these pics were taken and then took advantage of the daylight and stunning views for our second tour. I didn’t have a lot of makeup with me, I was tired, and I am generally uncomfortable taking pictures in front of random people, so these aren’t the best photos in the world, but when you have an unblogged garment with you at Hearst Castle, YOU TAKE THE PHOTOS ANYWAYS, lol.

Oh yeah, and a one good shot of my sandals that I made this past spring! I love these shoes- they have gotten looser over time because leather relaxes and because I was experimenting with this style and probably could have made them fit slightly tighter but at the time I didn’t know any better…but they are still super comfortable and pretty!

Thanks, Claire, for the shots, thanks, Lawrence for the fun road trip, and thanks, Kelly for the inspiration for this dress!!!!!

 

The $34 Dress

A couple of years ago Claire took me on a surprise weekend trip for our anniversary to a small town in southern California a few hours away from us in Los Angeles. The town was quaint and pretty- it had one main street running through town that was home to a few restaurants, a couple of bars, an ice cream shop, and a surprising number of antiques stores. Since it isn’t always safe for us to eat out (Claire has dietary restrictions and can get sick from cross contamination), we ended up spending much of our time in town visiting the thrift stores and antique shops, looking for nothing in particular. It was fun because, unlike LA where everything minutely vintage or mid-century mod gets a hefty price tag slapped on it to make money off the stylish Angelinos with disposable incomes, the items were mostly moderately priced. They still weren’t as cheap as they would be in, say, a vintage shop in Alabama, but they were reasonable!

Since we aren’t collectors of anything in particular, we decided to hone in on sewing supplies, asking each shop owner if they could point us in the direction of their buttons and needlework items, and we found tiny stashes of some pretty marvelous finds. I took photos of them at the time and I definitely shared them on instagram but I am too lazy to go back into my feed and hunt them down! At one point we came upon a vintage clothing store that looked very well curated and tidy, so we stepped inside and ended up spending an hour roaming it’s collection of clothing. We tried on stuff for fun, I ooohed and ahhhed over the collection of 80’s heels, and I rifled through all the accessories. We were about to leave when I commented on  the dress in the window that had caught my eye when we were walking into the store. I didn’t want to bother the salesperson to go through all the trouble of pulling the dress down, but Claire coached me through it (you wanna talk about an everyday cheerleader? Claire is IT)!

I went into the tiny bathroom that was also being used as a storage room and changing room and I slipped the dress on over my head. I could not BELIEVE how perfectly it fit me. There wasn’t even a mirror inside the bathroom but I could tell immediately by the way it felt that it must look glorious. I knew I was right by the look on Claire’s face as I walked out of the bathroom. “Oh my god, honey!”, she said. “WOW!”. The lady tending to the store said that tons of people had come into the shop just to try this dress on but it had never fit anyone before. When I got to a mirror, I marveled at my luck- vintage clothes don’t often fit me so well right off the hanger, but this looked like it was made for me. The tag on the dress said $34, and it was labeled as “30’s/40’s”.

I knew that it probably wasn’t a dress I would ever actually wear. It was made of what looked like a cotton and linen blend, and it had held up very well over the past 8 (!!!!!) decades, but the fabric was very worn in some places and stained in others. Amazingly, the entire thing was handmade- the seams inside were raw, but each seam had been edge stitched on the outside to reinforce it, so there were no holes or tears anywhere to be seen. I am really not a fan of wearing the color red and I also thought that the print, although beautiful, took away from the gorgeous pleats and draping of the design, so my immediate instinct was to buy the dress and then make a pattern out of it, using a fabric that suited my tastes better…and that is exactly what I ended up doing- a full 2 years later, lol!

Initially I considered trying to rub the pattern off without taking the actual garment apart, something I have done in the past with simpler designs, but there were too many details that I was afraid I would miss if I didn’t fully deconstruct the dress, and I also wanted to know more about how it was put together. There were certain techniques implemented that I had not seen before, like the side button closure used in lieu of a zipper (which I ended up not being able to do with my own remake of this dress, but more on that later).

Taking the seams apart was more painstaking than I anticipated because of the aforementioned edgestitching over almost every single seam of the garment, but I managed to get it done over a couple of episodes of something unmemorable on Netflix. Once I took apart all my pieces I ironed them flat and used chalk to try and mark all the foldlines of the pleats in the bodice, sleeves and skirt. The chalk didn’t hold up too well, but thankfully the decades-old fold lines were pretty embedded in the pattern pieces and I was able to still see them pretty easily. After ripping out all the seams, I was left with sleeves, a front collar, back collar and back neck facing, a bodice front cut into two pieces, a bodice back cut on the fold, button bands, two skirt fronts that I decided to cut on the fold, a skirt back, a belt, and the tiny bindings used for the side opening of the dress. I then placed each pattern piece over translucent paper and traced them, making sure to mark the stitch line and add 5/8″ seam allowance. This part was also painstaking because the stitch line and the edgestitch lines were hard to tell apart, so I guesstimated when necessary and tried to true all my paper pieces once I had them all plotted out (I didn’t do a very good job of this, but I did well enough that I am wearing a finished dress in these photos that isn’t falling off my body, lol).

Cutting this dress out from the narrow 2 yards of mint green raw silk I have had in my stash for over a year was very challenging. I was terrified that I wouldn’t have enough room for all the pieces but I forged ahead because I was so determined that this was the fabric that needed to be paired with this design (and I am very glad I was so headstrong because I think the end result is pretty stunning). Ultimately I had to puzzle piece everything together very carefully and shorten the sleeves by a couple of inches to make enough room for everything else, but I DID IT!

 

This dress came together fairly easily, and the most fun part was seeing the large, oddly shaped pattern pieces for the bodice accordion together to make the most beautiful pleated bodice I have ever sewn. Raw silk behaves very differently than the manageable cotton/linen that the original dress is made of, so of course the finished product also looks very different- they are almost like two different dresses. I love sewing with raw silk- it’s unlike anything I have ever worked with, but it doesn’t press super well and it has a lot of body and cushy-ness to it, so the pleats didn’t like to stay put as I was constructing the bodice and I had to reposition them a lot. I also learned that I prefer to make pleats based on ironing the folds down rather than based on pinning notches together, so it took me a lot of time to get everything just right since I was essentially creating the construction order as I went along. I realized that there is only one set of actual darts in this dress- everything else is a pleat folded into a triangular dart shape, which gives the dress a lot more ease and comfort, and is probably why I fell so in love with it when I first tried it on.

After finally getting the bodice pleats uniform and neat looking, I moved onto the button bands and realized that I should have constructed them differently than in the original dress, only because my fabric was so thick and made those seams a lot bulkier than they needed to be. I easily could have omitted the band and simply added length to the front center of the bodice and folded it in on itself, applying some interfacing to the inside piece. To make up for the bulk, I graded the seams to make them as flat as possible, and although it’s a bit thick there, it’s not visually noticeable.

The pleats on both the bodice and skirt are sewn down for several inches to ensure they hold their place and stay looking nice and neat, a technique I have applied to other garments in the past and appreciated seeing on this vintage item. After sewing the back skirt darts and front skirt pleats, I basted the bodice and skirt together and tried it on to see how it was looking, and it! was! GLORIOUSSSSS!!!!! I decided at this point to use a side zipper on my dress in place of the tiny snap band that the original dress was sewn with. I love how the the hidden snap closure looks on the red dress and it seemed relatively easy to replicate, but I could tell that my cush-y, ravel-y raw silk was going to be a huge pain when working with all these fiddly bits and I was worried I would not be able to get the bulky seams to lay very flat. Using a zipper allowed me to get away with just serging the raw edges instead of having to enclose them with binding, and I’m okay with that, although a future iteration of this dress might feature the cute snap enclosure.

I did decide to bring in the side seams a tiny bit more at the waist, and now that the dress is complete I realize I could have brought it in maybe even another one inch in total- I could stand for it to be a tiny bit more snug. Thankfully the attached belt kind of eases in that extra fabric around my waist without the dress seeming like it’s too big, and I can alter the pattern pieces a bit the next time I make this dress. I am SO glad that I ended up having enough fabric to squeeze out the belt! Of course I had to puzzle piece some of my scraps together to make it happen, but I did it! One of my favorite things in sewing is when I manage to use up almost my entire yardage with barely any scraps leftover. I always try and get the bare minimum of yardage required for a garment, which of course can bite me in the ass when I make a mistake or miscalculate how my pieces need to be laid out for max efficiency, but when it works out well and I have only a tiny handful of pieces to throw into the fabric recycling bin? There is nothing better!

Now that I am finished, I am super impressed with how this dress came out, and I am glad to be reminded at how fun and rewarding deconstructed pattern making can be. With the difference between my fabric choice and the original garment, this dress could have easily come out ill-fitting or missing that special something that attracted me to the dress in the first place, but I love everything about it- how it looks, how it feels on, and how it feels in the thicker, softer fabric. One thing I really like about this dress is how it works so well with a slip underneath it. I don’t wear slips very often because they are often not a necessity for the garments I make, but this mint raw silk likes to get a little clingy to skin and undergarments, so having a simple, slippery garment underneath it makes it flow right over my body and lay perfectly. Which puts it even more firmly in the “vintage” category since I equate so much of women’s vintage wear with beautiful slips, undergarments and stockings.

I will most definitely be making this dress again- I can see it in a slippery charmeuse or a satin, or this rust colored crepe I bought several yards of right before the LA location of The Fabric Store closed, and I think it would be really cool to cinch the waist in even more so that it doesn’t need the belt and to make it tea or floor length. So glamorous! In all my years of sewing I have never once wanted to start a business within the realms of the hobby, but making this dress was the first time I considered it, albeit briefly- I love the idea of finding beloved, well-designed vintage garments, deconstructing them to create a pattern, and then grading and selling the design to make it available to sewists the world over. Not that it’s something I could or would actually do – making patterns is a LOT of work (bless all you indie designers out there who are making it look so easy), and things get a little tricky when working with the intellectual property of others when you can’t get their permission/attribute work to them because the information is missing or unavailable), but it still feels nice to be inspired in such a new way with this old hobby of mine!

 

 

 

 

Jenny Overalls

I have made three pairs of overalls that have a straightforward, utilitarian design- not a lot of frills or shaping (which is what I wanted at the time)- two for me and one for Claire. I blogged about the makes for myself with the Turia dungarees here and here and I wear both pairs an awful lot- they are much loved and much worn (despite a few issues I had with the finishing techniques in the pattern. But when Closet Case Files came out with the Jenny Overalls earlier this year, I was super excited to make them because they have such a cool shape and style, with a more aesthetically interesting flourish than the pairs I had made before.

The Jenny’s have a bib and separated bib pocket on the front, but they don’t have a back piece; instead, the straps are placed at the back of the pants waistband and criss cross over the shoulders to connect at the front bib. I love that detail because it doesn’t cover up the whole body in the way that many overalls designs do, and it allows you to show off a pretty shirt or tank with some interesting detailing or print.

 

The pants have slant side pockets which I also love, but my favorite thing about this pattern is the way the pants are drafted- the legs are slim in the hips but wide through the thigh/knee/calf, and it gives the whole look a bit of a vintage flair. They also sit high on the waist and aren’t slouchy like most overalls patterns can be. Again, I love the old school overalls look, with their ease of wear and wide waist- my Turia Dungarees can be thrown on over a tank top, paired with some Birkenstocks or sneakers, and I can be out the door in no time, looking comfortable and cute. But the Jenny’s feel fashion forward in a way that my Turias don’t, and I just LOVE having these options in my wardrobe.

I decided not to overfit the waistband of my Jenny Overalls and allow a little bit of extra room for movement, comfort and tucking a shirt in them, but they are still much more snug at the waist and hips than my Turias. I opted for the functional slant pockets (you can also omit them), the topstitched faux fly on the front, faux flat felled seams, and one side zipper (I thought I would need two, which is an offered option that I deeply appreciate since I have a hard time getting into snug high waist pants with my hips, but since I made the waistband a little looser than normal, I was able to get away with just one).

An option is also provided to use jeans buttons at the hips instead of zips, and Heather sells overalls and jeans buttons hardware from her store, which I quickly snatched up (the Dritz overalls buckles that I bought and used for an earlier pair of overalls have held up fine, but have never felt as sturdy or looked as nice as I wanted them to).

The instructions for this pattern are, like all CFF designs, straight forward, and easy to follow. Sewing and topstitching a multi-faceted make like this is SO FUN, especially when you trust the designer and don’t feel like you have to keep your eyes out for missing steps or finishes. The only issue I had with these (and I had the same issue when I made Claire the Jenny shorts this summer) is the zipper insertion at the side seams. Because of the thick denim coupled with the pocket lining, the seams are really bulky and it was hard for me to get the topstitching around the zipper perfectly straight, although I did the best job I could. I don’t think the zipper detracts at all from the overall look of the garment, meaning it isn’t noticeable and the stitching doesn’t look painfully wobbly- as least not by the Three Feet Rule, haha.

I used the mint green Cone Mills colored denim that Threadbare Fabrics has been keeping in their shop this summer and it has been an excellent pairing with this pattern- the denim is on the lighter side of mid-weight but still firm and stable, so it doesn’t make these overalls feel too bulky or heavy, which is important to me since I will be wearing them in a fairly climate.

Figuring out the hem of these pants was tough for me- originally I had planned to make the cropped version, but since I started making these overalls right after I had made the Molyneux for Vogue Dress-Turned-Jumpsuit (in which I hacked the cropped length of the Jenny pants onto the Molyneux bodice), I realized I wanted to use a different silhouette so I didn’t have two versions of the same jumpsuit in my closet.

I am really glad I went with the full length- it will allow me to wear these overalls far deeper into the Cali winter than my cropped version would have permitted (and perhaps into the winters of other cities, too??). I couldn’t decide if I wanted to have the ground skimming hem or a slightly higher hem that shows more of the shoe, but wide legged pants hems are ALWAYS very tricky for me, and I have to be very specific about which shoes I will be wearing with said pants before dedicating myself to the length. Once I realized that these overalls matched best with my heeled booties as opposed to my clogs, the hem length made itself very obvious- the longer, floor skimming length was perfect!

The days are finally cooling down now (and for LA that means high 70s) so these overalls are prime fall attire. In these photos I paired them with a pink Niko top by True Bias I made last year, but I just recently sewed up a replica of this sleeveless turtleneck in a cream colored 1×1 rib from The Fabric Store that I think is going to look amazing and make me look a tiny bit less like an easter egg. I will surely grace instagram with this completed look soon, so keep an eye out!

Striped Wrap Jumpsuit

This project is brought to you by a domino-effect of inspiration via instagram (which is my FAVORITE kind)! I initially saw Katie’s (of What Katie Sews) absolutely fantastic wrap jumpsuit that she posted about on her blog here and fell in love. I love the shape! I love the fabric! I love the design! Wrap jumpsuits aren’t really a big thing right now, but they should be- I have been on a jumpsuit kick the past couple of months that is unreal (you’ll see the fruits of that obsession here on the blog soon), so every time I see a new version of one I get super excited. I have never before seen a design quite like Katie’s jumpsuit, though, and according to her blog post she got her idea from a garment made by Threadsnips.

Catherine sewed up a very cool vintage jumpsuit pattern that wrapped around the waist with ties and suggested that other sewist’s could recreate this design fairly easily by using a simple jumpsuit pattern and altering a couple of the lines of the pattern pieces, which is what Katie did to great success. Katie used a Butterick pattern she had in her stash for adapting hers, but I didn’t have anything in my arsenal that would work well for this hack so I took Catherine’s advice and just used the free In the Folds jumpsuit pattern from Peppermint Magazine. I am not gonna meticulously share all the details of what I did to adjust the pattern since both Katie and Catherine did the hard work of it already, WITH pictures (bless y’all!), so check out their blog posts to get the very simple details of exactly how to hack the pattern.

I will share the general details of what I did though! First I adjusted the shoulder seam of the jumpsuit pattern because I knew I wanted a kimono sleeve and not sleeveless, as the In the Folds jumpsuit is drafted. I basically moved the width of the dart of the front of the jumpsuit to change the angle of the shoulder seam so that it was raised higher, and I added several inches to the length of the seam to make it jut out from my arm. I drew in the pattern line for the rest of the sleeve (I basically just mimicked the line of Katie’s Butterick jumpsuit sleeve) and connected it to the side seam of the body of the jumpsuit, copying the same lines for the back piece. I adjusted the side seams of the jumpsuit pattern to make it a little closer fitting since some of the images I saw of the pattern in a google search seemed like it had an awful lot of ease in the waist and hip area.

After sewing up a muslin in some old bedsheets and improperly adjusting the length (I overestimated how much shorter the jumpsuit should be in the bodice and ended up making it WAY too short, so I added all but about a quarter inch of the length back when I moved on to my fashion fabric), I used a gorgeous cut of linen from The Fabric Store for my wearable garment. I have been SO into stripes lately (particularly stripe play!) and thankfully TFS has stocked a ton of really beautiful pieces to choose from. Plus, Los Angeles weather means I can get away with wearing this wonderfully breezy fabric for quite a while longer.

Initially I wanted to play around with the direction of the stripes (like one half of the jumpsuit in horizontal and the other in vertical), but my yardage wasn’t quite wide enough to accomodate proper pattern placement, so I stuck with the vertical stripes all the way around the garment and I’m actually really happy it turned out this way. The stripes of this yardage are already pretty dynamic, so adding even more drama to it might have put it into clown territory? I mean, I still love the idea of the directional stripes for a jumpsuit like this, but maybe if the stripes are all one color/size/pattern it will have a more subdued overall look. I’m sure my original vision is still somewhere in my future!

Anyways, after I sewed up my linen, I drafted facings for 1. the front neckline all the way down through the added triangular piece of the wrap to the crotch seam, 2. the back neckline, and 3. the sleeves. My original plan was to just use bias binding for the edges but I didn’t have very much striped fabric leftover and I also realized I should have something a bit more stable for the neckline since it is such a long seam line (also, after sewing this garment up, I know that for next time I need to STAY STITCH THOSE FRONT NECKLINE EDGES, because that fabric stretched waaaay out in the process of sewing everything else up). I used some white scrap linen I had for the facings and I interfaced them all, sliding the ends of the ties between the fabric and facing on each triangular edge before edgestitching them closed.

After drafting and sewing up the facings, the actual construction of the garment was SO FAST AND EASY. I left a hole opposite the edge of one side of my wrap for the waist tie to get pulled through, under stitched all my facings, I edgestitched the wrap onto the opposite pant leg a few inches past the crotch line to keep it closed. Since the front opens up to a wrap style, the back zipper is unnecessary, but it also means that the front wrap wants to splay open a bit, so I added a snap at front center to keep the wrap closed and I also added some bra strap snaps at the shoulder seams- I think there is a more technical term for this, but basically I created a loop inside the garment for the bra straps to be hooked onto which helps keep the shoulder seams in place.

I am CRAZY about this jumpsuit: it’s comfortable, summery, fun, and I have never seen anything quite like it in a store before. I am dying to make it in a solid, slightly more supple fabric for the fall- maybe like a crepe rayon or even a printed satin-y silk. I might try to add some pockets to my next one, and I might also try and adjust the angle of the neckline so the garment won’t want to fall open as much (hopefully negating the need for the bra strap snaps!). And longer waist ties for more drama! But all in all, this make was exceptionally quick and satisfying to make, and it’s technically not summer anymore but I should be able to get a few good wears out of this before the weather gets too cool. I am so very thankful for other sewists sharing their hacks, tips and makes with the community, (thanks, Katie and Catherine!) and thankful to Claire for taking these bright, pretty pictures!

(outtake)