Posts

Vogue: 0 Me: 1; A Tale of Two Cut Outs

It wasn’t just the cut outs that pushed this make into WTF territory, it was the armholes, too, but I am getting ahead of myself…

yep, basically how the whole process of constructing this dress went.

I was inspired to make this older (I think it’s out of print but it’s not vintage) Vogue 8900 pattern after seeing it on Ada Spragg’s instagram and falling in love with it. Everything about her dress is perfect- I loved the bright yellow color, obviously. I loved the weight of the fabric, which seemed sturdy and firm, offering some interesting contrast to the delicate cut-outs and shoulder baring silhouette of the garment. And I was also intrigued by the princess seams on the front of the dress, which start off parallel to one another in the bodice and then move towards each other in the skirt, creating hourglass lines on the backdrop of a slightly flared A line skirt. A lot of interesting features in one garment, but subtle enough to not appear too overwhelming, in my opinion.

I chose a fabric from my stash that I had just recently picked up for my monthly allotment at The Fabric Store, a barely mid-weight silk cotton in a beautiful large navy and white floral print. I fall in love with pretty much every silk cotton I get my hands on and this one was no different- it sews up with the ease of a regular quilting cotton, but it has a different kind of texture- soft and silky and crisp, with the tiniest bit of texture to it. It’s hard to explain how it feels between my fingers, all I know is that I love wearing it and working with it.

I knew to make a muslin before I cut out my fashion fabric since Big 4s are big on me and this garment in particular is designed to fit like a glove. When I announced on IG that I would be making this dress, Ada let me know that the cut outs were positioned in places that would make it difficult to wear a regular bra without it peeking through, so I was even more convinced that the dress would need to hug my bust and waist so that I could go braless without the fabric sagging or bunching up anywhere.

I cut out a size 10 graded to a 12 in the hips, sewed it up and tried it on, and it was even bigger than I had imagined it would be. The bodice was pretty much a perfect fit and I didn’t make any adjustments there- in comparison the waist was a pretty good fit as well, but the hips were much too roomy. There are a lot of interestingly shaped panels to this skirt but it didn’t make the adjustments too difficult. I left the side seams intact and instead focused on adjusting the princess seams in the side front and the side back panel pieces. The two curved seams in the front needed the most tweaking because subtle changes in those lines seemed to affect the fit most dramatically, and I also wanted them to mirror the lines of my own body as much as possible. Since these patterns tend to be drafted for someone several inches taller than myself, the “hourglass” seams on the front of the skirt just didn’t align with the curves of my own body, so I had to completely re-work them, but I was fairly successful with it in the end. I left out the bias strip cut outs on my muslin since I was only muslin-ing for fit. Next, I marked the lines of my new seams on my muslin dress, took the muslin apart, and transferred the new seam lines from the muslin pattern pieces to my paper pattern pieces in case I ever decided to make this garment again (at the time I thought that I certainly would, but now having experienced the cut-outs from hell, I’m not quite sure…)

I cut out my fashion fabric and constructed pretty much the entire dress before I got to the cut outs, which I assumed would be a piece of cake to finish. Now technically, the only cut outs are the two holes on either side of the waist, but since the armholes and the neck hole all required finishing with bias cut strips of fabric and almost all of them gave me a ridiculous amount of trouble, I am referring to all the holes in the dress as cut outs. The instructions in the Vogue pattern suggest that you sew the short ends of the bias strips together to create a loop, baste the long edges of the bias tape together, then sew the loop to the edges of your cut outs, topstitching down. I immediately side-eyed this method of application because for one, it leaves an unfinished raw edge on the inside of the garment, which is simply unnecessary (and to me, kind of defeats the purpose of using bias tape), and two, I had just never done it this way before, which is important to note. Sometimes you try a new-to-you technique for a familiar application and learn a better way to do something, and other times you try a  new-to-you technique and realize why you are never instructed to do things that way in the first place.

My bias tape application usually encases the entire raw seam and then is sewed down to the inside of the garment with a seam allowance related to the width of the bias tape. So this technique was…weird, to say the least. But, being trycurious, I decided to try this new-to-me method; I figured that maybe it would provide a detail or certain amount of ease that I simply couldn’t envision at this point. I did however decide to forgo stitching the bias tape closed into a loop before sewing it to the dress- I knew the chances of it being the exact right measurement of my cut outs when sewn closed was pretty low, and this is the only smart choice I made throughout this whole process, because my instinct was right- the bias tape ended up being too long on every single cut out. I am more comfortable with the method of sewing the tape down as you go, leaving an inch or so free on either end, then the sewing the tape together and stitching down when you have only a few inches of tape left to close the loop.

Anyways, I did it Vogue’s way and it was awful. The size of the cut outs on the waist were simply too narrow to accommodate the curve of the bias tape without skewing the hole’s shape, so the tape stuck up and out instead of laying down flush to the skin. I thought, ‘hmmm, maybe I need to cut off some of the binding in the seam allowance by serging the raw edges so there is less fabric in the outside curve of the tape?’, and then I proceeded to do exactly that. Serging the edges did not help it at all, and now I had two cut outs with significantly less seam allowance left, so continuing to work on them with the original pieces would be tricky (eventually it would turn out to be impossible). I put the side cut outs on hold and moved to the armholes to see if I could figure them out. A normal armhole, of course, is fairly easy to apply bias binding to- I have never had a problem with them before, but because these armholes are drafted into the shape of a racer back and curved deeply in the front, the openings are way more dramatic than standard armholes, which makes sewing bias tape onto the curves difficult to do successfully, giving me the same problems the cut outs did. For this bias tape application I decided to use a technique I was more familiar with, which was sewing the raw edge of the tape to the outside of the opening, then folding the other side of the tape over the seam allowance, thereby encasing the raw edge. I left about 1/4″ of the tape visible to the right side of the garment as shown on the pattern envelope, as opposed to folding the whole width of tape to the inside and top stitching down.

https://www.instagram.com/p/BVVV45sBw6H/?taken-by=jasikaistrycurious

You can imagine my surprise when I completed one armhole and realized that this technique didn’t help at all- the armholes, in fact, looked worse than the side cut outs (look at the IG shot above!!!! THE HORRORRRR!!!!!) The edge of the armhole stood out from my dressform stiffly, refusing to lay flat, and it even did some weird swirly thing where it puckered and gaped and made the armhole look stretched out (thank goodness I stay stitched my openings from the start, otherwise this dress might not have made it). Now I was running out of ideas. The way that the holes were behaving made me think that I needed to cut notches into the deepest part of the curves, but the pattern was drafted for use with bias tape, so why would you cut notches into bias tape?? And at this point I had vastly decreased the amount of SA included in the pattern because of serging my edges off the side cutouts, so I had even less room to work with.

I took a deep breath. After making a plea on IG and not getting any info that helped (except for Ada confirming that yes she had ignored the Vogue instructions for the bias tape application but no she hadn’t had a problem getting her tape to lay down flat, though she had used a much different fabric than mine) I could only think of one other thing to try out. I had ruined my bias strips with the shoddy application, and I was out of fabric so I couldn’t make any more strips that matched the dress. Instead, I used some 1/2 inch white single fold bias tape from my stash. I sewed the edge of the tape onto the raw edge of my cutouts (trimming the armhole openings to match the width of the side cut outs which had been trimmed when serged). At the deepest curves in the cutouts, I very carefully cut tiny notches into the outside edge of the bias tape, about halfway through the width. Then I topstitched the bias tape down to the inside of the garment.

Thankfully this method actually worked! Of course it is nowhere near as clean on the inside as I would like (I tried to take pictures but they turned out really blurry!), but on the outside, the cutouts lay down beautifully, which is all I cared about at this point- I just wanted the dress to be wearable! And when I started having so much trouble with the bias tape application, I thought there was a good chance that it wouldn’t be.

So here we have it, a dress that looks pretty cool after all is said and done, due in no small part to a Make-It-Work moment. The fit of the dress in the bodice is perfect- it doesn’t feel tight or constricting, but it looks fitted and the dress doesn’t bag out or sag anywhere. The skirt does have some weird puffiness at the seams right at the hip bones, but I can’t tell if it’s because the seams needed to be taken in more or because the fabric has so much body, and from what I can tell you can’t even see the puffiness looking straight at the dress, I can only see it when looking down at my hips when I am wearing it. Not a big enough issue to try and fix. I think that overall, the dress looks great, and since it was so close to going in the Butthole Bin, I just want to cut my losses and enjoy the save. I wore it to Mimi’s sewing conference a couple of months ago and then again at SDCC for our interviews and panels for our new Amazon animated show, Danger & Eggs, and it was a smash hit both times! I’m really happy with it and I feel super fancy wearing it, just so long as no one asks to see what it looks like on the inside…