Dotted Named Outfit with Slate Leather Flats
As mentioned before on this blog, Named is not my favorite indie pattern brand. They have some great looking designs and I love their styling, but the drafting and instructions generally leave me always desiring more. Sakijane describes her complaints (which happen to mirror every single one of mine) very succinctly in this post about her most recent Kielo Wrap Dress and I felt so validated when I read it- I was not alone in my disappointment with their patterns! But I also know that there are tons of talented makers out there who love Named and have lots of successful garments to show for it, so when I saw Katie of What Katie Sew’s 100th pair of cute Ninni Culottes, I decided to take the plunge and get the pattern myself. For one thing, this pair of pants seems like a good staple to have in my closet- elastic waist and cropped legs scream nothing but comfort to me, and I like that it can translate from houseclothes to streetclothes pretty seamlessly. I also figured that I wouldn’t have any issues with the construction methods since it’s such a simple design. I was (mostly) right on both counts!
As soon as I saw this organic cotton jersey from The Fabric Store, I knew I wanted to sew it up into something coordinating (I got yardage of both the white and the blue dotted, but as of this blog entry they seem to be out of the blue- if you’re interested in this fabric I would keep checking back since they restock frequently)! I knew I wanted the culottes in the blue dotted but I wasn’t sure what to pair the white with for my top half- I liked the idea of a boxy crop top but I didn’t have any patterns like that in my stash for knit-specific fabrics. And then I remembered the Named Inari Tee Dress pattern. I’ve had it for years and the one time I tried to make the dress, it was a disaster on me- not suited for my body at all and very unflattering. But I had never given the tee a go, and the tee seemed like it would be much less tricky to make work on my body. The pattern is suggested for wovens or fabrics with a light stretch, which my jersey was not, but I thought it would work just fine since there is no negative ease drafted into the pattern.
Both the pants and the tee came together very quickly. The pants have deep side seam pockets that attach to the top of the waistband, and I cut out the smallest size since Named tends to run big on me. The only issue I ran into is when I tried to fit the waistband. As with most elastic waist garments, I measured out the amount of elastic that felt most comfortable and then fed it through the tube of the waistband. But it was very difficult to feed the amount of elastic I wanted through the pants and have the waistband lay right- it was like the waistband was too long for the short amount of elastic I wanted, so the fabric was bunching up and squeezing together all over it. It’s kind of hard to describe, but it just felt like the waistband was too big and needed to be made shorter. But I couldn’t do that without taking the whole pair of pants apart and taking out width from the top of the legs. So I left it as-is, trying to make the waistband as smooth as possible as I sewed the zigzags around it that keep the elastic stable inside of it’s casing. It looks a bit lumpy and bumpy to my discerning eye, but you definitely can’t see it thanks to the dots on the fabric, which cover up any inconsistencies.
After all that, I think the waist is still too big on me- the pants ride down, particularly in the back, and I have to keep pulling them up on me- I almost wish these had belt loops, which totally defeats the purpose of an elastic waist, lol. But I’ve still worn them a lot and think they are really cute! The next time I make them I am going to take at least an inch of width from each of the pants legs, plus the waistband, and see if that makes them fit me a bit better.
The tee shirt had issues, too, but it wasn’t because of the drafting. I wanted to add a band around the bottom edge of it because without it, the hem looked a little stretched out and haggard (again I think this is because there was no negative ease in the pattern and the hem isn’t intended to fit around the waist or hips of the body to help pull and stretch it out, it’s just kind of floating around my rib cage willy nilly). As you probably know, when adding a band to the edge of a neckline or the hem of a sleeve in stretch knit fabric, you usually need to cut the band a bit smaller than the opening you are attaching it to so that the band will ease in the stretch of the fabric and lay properly. If you cut it the same size, the hem will look stretched out and wavy. I applied this to the bottom hem of my shirt, but I slightly miscalculated the measurement so that the band was a tiny bit too small for the hem. The result of this is that there is a bit of wrinkling where the band is eased in too much in a couple areas along the seam. Again, not a glaring mistake, but definitely something I notice and frown at every time I see it.
As a whole, I love the silhouette of this outfit- I love the loose fit of both garments that somehow manage not to swallow me up thanks to the break that the crop top provides by showing a little of my belly. I love the matchiness (that isn’t too matchy) of the complimentary dotted fabrics, and I love how comfortable it is. Although I made these pieces to go together, I mostly wear these pants with a non-cropped t shirt (which helps the pants stay up on my waist) and a jean jacket, and I really want to pair this crop top with my Persephone pants at some point, because I think it will have a similarly interesting silhouette.
OK, so on to the shoes!
Rachel of RachelSeesSnailShoes (she is my unaware and unofficial mentor, LOL) has so much shoe inspiration on her IG, and my pair of shoes was inspired both by one of her designs and a RTWpair I found on pinterest by Rachel Comey.
Ultimately I changed the design a lot as I was working on the lasts, but I love the journey that I took to get to where I ended up, and they fit pretty great! They are comfortable, and the straps stay on my feet, something I always worry about when I don’t use buckles on slingbacks. Interestingly, the slingbacks tend to slide off the back of my foot when I’m sitting down, but when I’m standing and walking, they stay perfectly in place.
I used a patent leather from The Fabric Store in LA that I got many months ago and I love it- its a cross between gray and blue, not too loud but not too subtle either, and I think it makes a pretty cool neutral. I also decided to line my slate gray leather with a thinner cut of leather so that I could put a toe puff in the toe of the shoe. A toe puff gives the foot of your shoe some extra rigidity and keeps the shape of your toes from imprinting into the leather as you wear them over time, and I am very happy with my decision. They aren’t always necessary, but they can make your shoes last longer depending on what kind of upper leather you are working with.
The last time I made a pair of patent leather slides (which sadly I never blogged here so I can’t link to them, damnit!), they came out okay but there was a lot of room for improvement. My heel hangs off the back of the shoe just a tiny bit, which I HATE (the last fits my foot but the upper must be a bit too narrow in the toe resulting in the back of my foot sticking out of the shoe) and the lasting around the toe leaves much to be desired. You can’t see it from the top of the shoe, which is great, but if you look closely and the bottom and very front, you can see that there are wrinkles and folds and it’s not very smooth at all. Thankfully I have gotten much better at lasting this tricky area and the toe on these shoes looks damn near perfect, at least for my skill level.
The lasting process around the toe usually requires a lot of patience and hand strength from me, and I almost always slam my thumbnail with the hammer at least once getting those little nails all around the edge. But I can see how well my patience pays off when I look at a pair like these and see that it doesn’t have a handmade look the way some of my older pairs do- and nothing is wrong with a handmade look because…well, they ARE handmade! I just like to see concrete evidence of a learning curve, to see that I am growing and getting better and feeling more confident in my construction and design!
I am very happy with these shoes and excited to get started on my next pair, which will probably be using the beautiful new round toed lasts I just bought from I Can Make Shoes. They just stocked their online shop with some really cool block heels and I bought a couple pair for future use and I am just itching to get started. The only thing holding me back is trying to narrow down what design I want to use and that feels like it could take months! Wish me luck 😉
I want to make some of those culottes! They look so cute on you. Thanks for sharing your sewing adventures with such detail.