A Golden Dress for Your Grandma

We are way overdue for a #grandmachic make!

This gorgeous dress was finished months ago and was purely inspired by the pattern image on the envelope. I had been looking for a pattern like this for so long, and had even attempted to draft/hack something close to it (it was the original inspiration for the sheer fabric I used in this make) but I never managed to get close to recreating it until I found Simplicity 8545.

Image result for simplicity 8545

What I like so much about the pattern is the sheer, embroidered fabric which gets paired with something more opaque (in this case, a slip) underneath. I like the peek of skin you get around the embroidered pieces of the outer fabric, and I love the way the embroidery kind of dances around on the body. I also like the high waisted gathered skirt attached to the loose-fitting bodice. The whole look feels a bit effortless, but it could easily be dressed up fancy, depending on how you style it. I had seen some exquisite embroidered tulle around the fabric district before, but while digging through my fabric stash I came across this brilliant bright yellow and gold embossed silk that I picked up at The Fabric Store in LA right before that location closed. I bought it without any idea of what I would make with it, but I felt like I couldn’t leave it behind because I LOVED the shade of yellow so much and I thought the whole piece was just incredibly unique. Once I got my hands on this pattern, though, I knew it was going to be a match made in heaven.

I should have muslined this pattern before I cut it out, because like most Big 4 patterns, they tend to come out huge on me, but I had no idea exactly how much ease was in this thing (I couldn’t find the information on the pattern pieces but it’s possible I didn’t look hard enough)! I chose a smaller size and assumed it would be a totally easy thing to fix any problem areas since the design was so simple, but it still came out about 5 or 6 inches too large in the bust. Somehow I was able to use the original darts in the pattern pieces and just take the extra fabric out at the side seams, but I also had to chop off about 2 inches from the bottom of the bodice, otherwise it would have landed way below my natural waist. I messed up on the sizing here, but thankfully I paid close attention to where the gold floral design would land on the bodice front. I knew I didn’t want it centered and symmetrical (#sorrynotsorry to the people who DMed me on IG “politely” explaining that my bodice wasn’t cut with the design centered on the front- I know it wasn’t, and that was intentional) because I wanted to give some visual interest to the composition of the bodice area and I liked the idea of having the floral bouquet crawling up my shoulder a bit. Placing the design off-center also allows the negative space of the fabric to become its own separate visual, and I like the peekaboo of skin coming out in unexpected places, particularly around the shoulders and arms.

Anyways, it took me a while to hack away at the crazy amount of easy in this pattern, but once I got it to a place that felt right, everything else was (mostly) a breeze. The trickiest thing about this make by far was the fabric. It’s silk, it’s slinky, it’s shifty, and it likes to fray so it needs a LOT of attention. I used a microtex needle to keep it from pulling on any of the individual threads but surprisingly I didn’t end up needing to use a walking foot. I sewed slowly and carefully, and aside from a few gold threads that got pulled up, the fabric was mostly well behaved. I spent the most time gathering the skirt with basting threads and attaching it to the bodice with french seams (gathered french seams are a real pain in the ass and never come out with absolute precision for me), but luckily it’s nothing you would see unless you were looking for some wobbly seam lines on the inside of the garment. Attaching the binding around the neckline also took a lot of patience on my part because I wanted it to look clean and neat, and I think it came out beautifully.

Once I completed the main parts of the outer dress I realized that I absolutely didn’t want to close the dress with a zipper as per the instructions- the sheer fabric seemed much too delicate to muddy up with a bulky plastic zipper, and I don’t particularly like it when you can see zippers on clothing. I know it’s a trend right now or whatever, and I am definitely into the sheer look that Ada Spragg introduced me to on IG, but a bulky zipper on sheer transparent fabric is just not my thing. So I decided to create ties in the back to close the bodice and waistline. I have seen ties used on vintage garments before and this dress was definitely looking very vintage-inspired by this point, so I thought it would be a lovely feature. I carefully created several thin lengths of ties from my silk fabric and knotted them at the end. Then I folded in my seam allowance twice (above the french seam that I used for the back skirt seam, right where the zipper would have been inserted), and sewed it down to the bodice. I attached the ties to the back with some hand stitching and decided to just use two pairs, one at neck and one at waist.

I absolutely love the way the ties look in the back, and it works because the outer dress is worn over a slip underneath that covers any exposed body parts that would have shown through the gaps between the ties. This Simplicity dress pattern also comes with a pattern for the slip worn underneath and this was…a really strangely designed garment. I hadn’t realized this when I first purchased the pattern but it’s actually designed WITH A BACK ZIPPER, TOO! Yes, that’s right- A SLIP. WITH A BACK ZIPPER. Meant to go under another dress that ALSO HAS A BACK ZIPPER. I’ve seen some bizarre design details in Big 4 before, but never something this glaringly wrong, lol. The thought of wearing two garments with zippers in the exact same place going down my spine is enough to give me agita. Who in the world would design such a thing? I have never even seen a loose-fitting slip with a zipper, so initially I thought that maybe the slip was drafted in a way that I wasn’t familiar with, a way that would make it impossible to get into any other way without the aid of a back closure, but of course it wasn’t. It’s a pretty traditional slip design: it isn’t cut on the bias but it has spaghetti straps on the shoulders and wide neck and back openings, meaning it should be a very simple thing to slip it over your head. To be sure that it didn’t need the zip closure, I cut my back fabric on the fold without the zipper and I basted the side seams to test it out (my slip fabric is a silk without a significant amount of stretch), and yes, that baby slid RIGHT over my head like a dream, although unsurprisingly it was STILL too big even though I made the smallest size and graded up in the hips. I would rather the slip be too loose than too tight so ultimately it’s fine, but on it’s own it’s just not the best looking thing I have ever made. Anyways, this is all to say that YOU CAN ELIMINATE THE ZIPPER ON THIS ONE, FOLKS!

The slip is the only thing I am a bit unhappy with from this make. I mostly followed the instructions but should have just sewn it up in the way I thought it should look. It is designed to have a small folded hem on the neckline and armholes, but I wish I had created some bias binding for the top hem instead. Folded hems on curved edges rarely turn out perfectly for me when I am using a shifty fabric like silk, and a bias bound edge would have looked so much neater and more professional. The corners where the straps are attached look bulky with the two hemmed seams coming together, and I just don’t like how it looks on me. Thankfully, the outer dress covers up all the imperfections of the slip so it’s not a big deal, but if I ever make this again, I’ll definitely use a different pattern for the slip. One thing I did change was to make the straps much skinnier than they are designed. The draft has them at something like 5/8″ width which looks bulky and weird even under the overlay dress, so I remade them to be thinner- honestly I probably could have gone even thinner than I did, but still, they work much better now.

Looking over these pictures I feel we did a disservice by not getting a great shot of the fabric on it’s own- the gold floral emblems on the yellow sheer fabric are really spectacular in real life, but you can’t see the details very well in these shots. Another thing you can’t see in the pictures is how ITCHY that sheer fabric is! Hahahaa! OMG! I have super sensitive skin to certain fabrics, but because the underside of the yellow and gold silk didn’t feel particularly gnarly on my hands I didn’t even consider that it might be an issue- but of course, the palms of my hands are toughened up and much less capable of determining what feels uncomfortable than the skin on my shoulders and neck. When I first completed this dress and tried it on I almost tore the whole thing off straight away because it was so immediately icky feeling. But I think maybe I had a dramatic reaction because I just wasn’t prepared for it. Once I tried it on a few months later to snap these photos, it felt a little better- still itchy, but once it had been on my body for a while I mostly forgot about it. I have been looking for tan long sleeve tops made of pantyhose material that I might be able to wear underneath this dress, and I think I could mostly get away with it except at the back neck area where the overlay dress opens up to show the slip underneath. I might be able to cut the neckline of the skirt wider so that it isn’t noticeable under the dress, as long as I don’t compromise the integrity of the fabric and get a bunch of runs racing all over the thing!

Thanks to Claire for these pics, and thank to you readers for your patience in waiting to see this up on the blog- I shared a lot of the process of this dress on instagram and then it took forever to blog about it so it just kind of disappeared on some of you!

Starry Night Dress

It’s been a while since I said this but….this dress was a JOURNEY, hahaha!

I have a conservative but beautiful stack of Vogue Paris Originals in my pattern stash, most of which were gifted as Christmas and birthday presents over the years, which I am slowly making my way through. I think I may have 3 or 4 of these makes under my belt by now, and some of them have been easier than others, but all of them have been challenging. I have found that the sizing for these garments, save for the normal adjustments I make on patterns regarding length, is pretty spot on and don’t have as much ease and therefore require as much futzing as most Big 4s. BUT! The instructions can be INSANE to follow. Part of it is because the distance between construction methods and materials then and now continues to get larger as time goes on. For example, a lot of vintage patterns from around the 70s and before include the use of interfacing, but iron-on interfacing either had not been invented yet or wasn’t readily available to home sewists, so the instructions always account for sewn-in interfacing, which of course needs to be attached to a separate fabric facing. As a modern sewist I am often so used to just ironing woven interfacing onto whatever pieces need to be stabilized, whether it’s the facing or the actual garment, that I forget that those aren’t always what the instructions are asking for.

Another reason these VPO designs can be so tricky to sew up is because the designs are so unique that they require construction methods that are very strange/unfamiliar. VPO patterns are pretty special, created by famous clothing designers of yester- (and sometimes today!) year to recreate some of their  designs for the home sewist, and these aren’t just your everyday bodice and gathered skirt kinds of dresses- these have interesting details and often complicated construction techniques that up the ante of your regular sew-at-home outfit.

Image result for vogue paris original pierre balmain

So back to this dress. Pierre Balmain was a couture designer of women’s gowns and dresses and hit his stride in the 40’s/50’s/60’s creating voluminous skirts with “nipped in waists”, using luxurious textiles with embroidery and beading, but as you can see, this VPO # 1625 is a very wearable, simplified silhouette, which is why I was so drawn to it; without having an excessive amount of frills and pleats, it screams decadence! The woman who wears this is SO FABULOUS AND UNCONCERNED that SHE CAN’T MOVE HER ARMS ABOVE HER HEAD…AND SHE DOESN’T EVEN CARE! It’s not the most practical design, those batwing sleeves that keep me from reaching up higher than my shoulders, but then again, red carpet ensembles don’t really have to be, and I am crazy about the look. It’s kind of like a cape dress, but the cape isn’t free-flowing all the way around- it’s tacked down at the front and back waistline and the “wings” of the cape are only free underneath the arms.

I was gifted this gorgeous Star Print Crepe de Chine from The Fabric Store and was  overcome by a surge of inspiration when I unboxed it. The print, small white stars of varying sizes stretched out across a dark navy background, is eye-catching and subtle enough to not look twee but bold enough to feel really special. It has a crisp hand, and even though it’s very lightweight, it is opaque on the body and holds it’s structure really well- it isn’t drapey or silky (although the texture is very soft), and even though it’s listed as a crepe de chine, it has a very smooth hand and the textured effect isn’t very prominent. An idea popped into my head that I could use this fabric for one of my VPOs, but I kept talking myself out of it, thinking that it would be too lightweight to pair well with this pattern in particular. Eventually I decided to go for it anyways- once I realized that the pattern didn’t require a heavy or lightweight fabric, it just needed something that held it’s structure well, I felt confident that the fabric would translate beautifully, and thankfully I was right!

First I traced out all my pattern pieces and (thankfully) remembered to shorten the bodice, but it required some extra work. I’m not sure if I have ever seen lengthen or shorten lines anywhere on a VPO pattern except the skirt/pants, and because the bodice is curved on the bottom and has indents to make way for attaching the bodice to the skirt in certain areas, I had to create my own lengthen/shorten lines by redrawing the bottom of the cape a couple inches shorter, then truing the lines of the side seams. Easy peasy!

Next I got to working on the skirt. I had no idea how well it would fit as-is, so I extended my side seams at the hips- VPO patterns come in one size as opposed to nested with multiple measurements, so you can’t grade between sizes and instead have to take in or add extra allowance where you usually grade.  I also widended my seam allowance on the side seams of the skirt from 5/8″ to 1″ so I would have ample room for making adjustments if I needed to. Next I cut the skirt out, basted the front and back darts, then tried it on to see where it needed more adjusting. I brought the back darts in a bit more and toyed around with the side seams til the skirt fit well in the hip and butt area, then I french seamed the side and back seams. All of this was pretty standard fitting stuff for me, but I made one big mistake- I adjusted the fit the skirt without taking into account that the front has an overlapping button band, so when it came time to constructing this part of the design, my skirt fit me perfectly when the front seams met at center, but not when they folded over to accommodate the placket. OOF!!!! ROOKIE MISTAKE, J! Somehow, some way, I was able to fudge things and I ended up squeezing just enough room out of the back french seam to give me a tiny bit more breathing room at the waistline of center front.

This dress is designed to have a lining underneath it, but I was confused as to what it would look like and whether I would end up needing it (I have trouble reading ahead in patterns if I don’t have a 3D visual aid, ie. the garment, to refer to), so I just moved full steam ahead but used french seams everywhere that I could in the event that the lining didn’t work and the insides needed to be finished. Another thing I neglected to take into account when adjusting the skirt was making sure that my bodice matched up with the smaller waistline. The bodice is attached to the skirt at the front and back waistlines and then flows freely underneath the arms, but now my back bodice was much too wide to match up to it. I decided to sew a big dart, beginning at the neckline and extending all the way down to the waistline, to cinch all that extra fabric in, and it turned out beautifully- it just looks like the back was cut into two pieces instead of on the center fold, and the print of this fabric is very forgiving so it looks intentional.

The bodice, though very simple looking, has a very interesting construction. There is a V-shaped dart at the lower front center of the bodice to accommodate the bust area since the dress isn’t fitted at the arms and there are no side seams in this area. I had never created darts like this- they start at the apex of the bust and then pivot before trailing out towards the front center, and because they intersect at the button band, the placket overlaps at the darts. Sewing this dart wasn’t difficult, but the instructions were pretty rough, and the maker should have been advised to use a tracing wheel to mark the seamlines of the darts on both bodice pieces (since it’s not a typically constructed dart, they didn’t show the normal dotted wedge line on the pattern piece to pin together and sew closed). I had to take my darts apart a couple of times to get it exactly right, but once I did, the effect was really cool!

The back neck facing was meant to be cut out separately for this pattern (which was difficult to tell in the instructions- there was a pattern piece specifically for the interfacing but not for self fabric) so I just applied the back neck interfacing directly to the back bodice, which worked out fine except now I had to figure out how to finish the neckline since I wouldn’t be sewing the outer shell of the dress to separate facings. To be honest, I am still unsure of exactly how they wanted the neckline to be completed, since, as I mentioned, the front facings are not separate and are merely extended pieces of the bodice folded in on itself. This is what I meant when I said that sometimes with these patterns you just have to do what makes the most sense to you instead of adhering to instructions that may or may not be correct. I trimmed the neckline of my fabric, made some bias tape, then sewed it to the seam line, understitched, and folded over and under to enclose the raw edge and give a nice, clean finish, which I am very happy with.

Lastly came the lining, and because I wasn’t sure if I was even going to make one, I hadn’t purchased any fabric to use specifically for it. I dug through my stash and found some black organza that I thought would pair well with the qualities of my poly crepe de chine, and it just…wasn’t quite right. The organza was a tiny bit too stiff for the star print poly, and the poly also creates a lot of static, so the dress just clung to the lining underneath instead of gliding over it. Although I loved the way that the lining was meant to be attached to the dress (just at the button band and shoulders, and designed with regular bias bound armholes as opposed to mirroring the lines of the batwing sleeves), I had already finished most of the seams inside of the dress so I just decided to omit the lining and wear a slip underneath if I felt like I needed more coverage- in these pictures you can still see that I am dealing with some static cling wearing a simple silk slip underneath, but in all honesty, the slip is unnecessary.

I bought a few packages of inexpensive but really pretty gold-rimmed white buttons to use for the front of the dress and I think they look great- they don’t interrupt the print of the dress too much and flow well with the rest of the stars around it.

This dress was a LOT of work to complete and of course if and when I make it again I know a million things I will do differently (or not do at all!) but overall, I am pretty stoked at how it looks, especially after seeing these pictures. The print is dynamic but so is the fit- I don’t often see many structural sewing patterns like this and I love the silhouette, specifically that swoop from back to waist to hips and the flow of the sleeves floating off the sides. So cool! I really want to make a pair of bright yellow heels to pair with this dress- I think it would be a nice nod to the bright stars of the print, but I also just love yellow and navy together and think the color combo would be brilliant!

Again, many thanks to Lawrence and Claire, who art directed this photo shoot and came up with some of the most beautiful photos we have ever taken- you guys are a real dream team, we should do this more often!

 

Starburst Dress for Stylemaker Fabrics Blog Tour 2019

Hey hey hey! I am chuffed (can you tell I have British friends on IG??) to be a part of this year’s Stylemaker Fabrics Spring Tour! The tour is an opportunity for fabric lovers to be introduced to and inspired by all the new textiles that the Stylemaker Fabrics online store has to offer, and there have been some really fantastic makes on the tour so far!

I had a really hard time figuring out which fabrics I wanted to work with for my make- there were so many pretty colors and interesting prints that I could have stared at the fabric swatches for days, but then I stumbled across a new-to-me-pattern by Amy Nicole Studio called the Roksi Dress and felt a surge of inspiration. This dress has a simple but clever design- it’s basically three of the same garments of varying lengths layered over each other, so a knee-length swishy spaghetti strapped dress goes underneath a hip-length swishy spaghetti strapped tunic which goes underneath a belly button-grazing swishy spaghetti strapped crop top. Cool, right? I love how this design leaves so much room for playing around with color and print, love what an easy dress this probably is to wear and make, and I love how far you can stretch the pieces out for various looks…the pieces can be worn individually or together in various ways to create completely new looks! Thinking that this was the garment I was going to make, I spotted three different, very summery shades of tencel twill from Stylemaker Fabrics that I knew would look really lovely together, reminding me of a popsicle, or sherbert. Something summery and fun and breezy in the California heat!

Me trying to be in West Side Story

No sooner had I ordered my fabrics than I stumbled (it appears that I stumble around a lot on the internet) upon a version of McCalls 7894 that Bianca of Thanks I Made Them recently completed. I came across it because the McCalls instagram shared a picture of her make on their account and I! WAS! SMITTEN! I had not seen this Big 4 pattern before and if I had, I’m sure I would have overlooked it. For some reason the pattern envelope just didn’t call out to me in any way, shape, or form…however, with Bianca’s spin on it? WHOAH! I loved the use of color in her fabric choices, which made the whole dress feel like a day at the beach, and the style and fit were just so flattering, even with it’s weird waistline which dips down at the sides (not usually my cup of tea). Even though I had been dead-set on making the Roksi Trio, I was suddenly in the McCalls 7894 camp, and I imagined that my three cuts of fabric would transition beautifully into this dress. Ultimately I decided that switching these patterns was a brilliant idea because the Roksi Trio, while it would have looked great in my three sherbet hues, would be better served by playing around more with print and color than just color- every version of the Roksi Trio that uses prints and solids together stands out, and I would love to make this pattern in the future using some exciting prints from my stash!

So onto this here make…I was very out of Big 4 practice when I started this project. Because of my Family Crisis/December Hiatus and a busy work schedule in Jan and Feb, it had been a while since I had created much of anything, much less a Big 4 pattern I hadn’t sewn before, and I was out of practice. Because of this, I made a lot of mistakes that I normally don’t, but fortunately I was able to fix pretty much all of them!

First mistake: I pre-washed a bunch of new fabrics in one load (these tencel twills plus a couple more) and got bleeding on the yellow and peach cuts of my tencel twill (surprisingly the pink didn’t take the bleed). The bleed wasn’t super dark and it wasn’t completely covering the yardage, but it was definitely noticeable and annoying. I think forgot to put a dye catcher sheet in the wash when I was pre-washing these, but I shouldn’t have washed all the pieces together in the first place- this was totally my bad. Also, before anyone suggests in the comments that I should have used that smelly dye-remover stuff to get the spots out, I chose not to use it because I think the results can be ineffectual- when I have used it in the past it has gotten most of a dye bleed out, but never all of it, and it has faded the original color of the fabric I used it on, which I didn’t want to happen- the vibrancy of this tencel twill is one of the reasons I picked it out! As a result of the bleed, I had less fabric to work with because I had to avoid the areas that were dotted with blue. Stylemaker Fabrics very generously offered to replace my fabric, but I wanted to avoid that at all costs- I HATED the thought of wasting all that fabric and I was determined to make this project work with what I had. With some artful placement of my pattern pieces, I successfully cut out most of the dress without getting too many of the blue spots anywhere, although there are a couple of tiny, very inconspicuous places where the dye spills over- but I would have to point them out to you (and you know I’m not gonna do that!)

Next mistake: I totally forgot to grade out from my waist to hips when tracing out my pattern pieces, even though I do it on literally ALL BIG 4 PATTERNS I make, so when I tissue fit my pattern pieces onto my dress form, there was no ease whatsoever in the hips! Instead of recutting my pattern pieces, I decided to simply add extra seam allowance (via paper taped to the edges) to my skirt pattern pieces to accommodate the room I needed. Once I made those tweaks, I sewed the dress up, serging the insides close to the seam line to finish them since there are a lot of curves on the dress and I was afraid french seams would be too bulky. I basted the skirt and bodice pieces together and tried it on and…. I HATED IT!

Image result for hated it gif

It looked awful- ill-fitting, super frumpy, too long…issues I am used to addressing early on in construction with my pattern tweaks. Then I realized why- I had ALSO totally forgotten to shorten my bodice like I also ALWAYS do! What was wrong with me?!? I was such a mess! I didn’t have enough un-spotted fabric to re-cut my bodice so I had to take the easy way out and chop off an inch of the length from the shoulders to raise the dress higher. Of course this was not an ideal fix because it changed the drafting throughout the entire bust area, affecting the armholes and sleeves and making the upper bust area have much more room in it than necessary, but it was the easiest, most efficient fix and it isn’t too noticeable. To accommodate the raised/shorter bodice, I had to take out an inch from the height of the sleeves so that they would fit the shorter armholes, and I also had to extend the opening of the armhole below it’s original drafting so that they wouldn’t be too tight.

Completely separate from the bodice length issue but just as frustrating was the front bust area. It is designed with gathers under each side of the bust, and then it crosses over to wrap at center front, but on me, it looked hideous. Part of this was because I had not yet shortened the bodice, so the waist was way too low making my boobs look like they reached to my belly button (low swinging boobs might be in my future, but I am not there yet!). Beyond that, the look just wasn’t flattering on me- maybe because I don’t have a very full bust so the gathers had nothing to hold. Regardless of the why, I knew I wanted to omit this design detail. I contemplated trading them out for darts but ultimately saw that pleats worked much better, still giving me lots of ease and wiggle room in the bust and keeping in line a little more closely with the original design.

 

Those were the major mistakes changes I made to the dress- once I lifted it up by shortening the bodice, the skirt fit much better (it had initially been too low and wasn’t hitting my bottom in the right spots). Thankfully this tencel twill was a real dream to work with and the fabric was able to withstand a lot of hustle and bustle as I made major and minor changes to the dress throughout construction. I have always been drawn to tencel twill because it has a sandwashed look to it, a tiny hint of sheen that bounces off the fabric when the light hits it in the right spot, so it makes something that would otherwise look ordinary seem much more luxe. The weight of this tencel twill is also particularly nice- it’s got such a nice hand feel, and as you can see, the drape is terrific and pairs well with this dress. The fabric looks beefy without actually being heavy, and it took my sewing AND my unpicking beautifully!

This dress is only lined in the bodice, which makes it feel substantial and supportive while the skirt gets to stay light and breezy. I had been referring to this project as the sherbert dress as it sat in piles of fabric waiting to be sewn together in my craft room, but once I actually started construction I was amazed to see myself transformed into a package of starburst! In this dress I look like a trio of red, pink and lemon candies, and I am not mad at it one bit! This color combo still screams summer, just as I had hoped it would, and I think the choice looks really chic and fun without looking like a kindergartener (no shade to kindergarteners!)

This dress was a lot more work than I was anticipating (again, all because of my own mistakes), but it was totally worth the blood, sweat and tears- I love the overall look of this dress, and something about it feels a little bit vintage to me. I don’t know if it’s the poofy sleeves or the color blocking, but it looks ripped from a page of a seventies teen magazine, and I dig it, man!

Thank you, Stylemaker Fabrics, for inviting me on your fabric tour this year- I never would have made this dress without inspiration from your spring collection, and I know I will have a lot of fun wearing it out in the world! For this dress I used tencel twill in coral, yellow, and melon, and you can find more of the beautiful fabrics in the newest collection at Stylemaker Fabrics here! There is one more stop on the tour tomorrow, by none other than Michelle of Stylemaker Fabrics herself, and you can check out her make here!

Lastly, big thanks to Claire and Lawrence (BFF) for teaming up together to art direct and shoot my looks today- Claire is always a big help to me in documenting garments for my blog, but Lawrence’s keen eye for detail and enthusiasm in helping us stage everything was amazing- it was one of the most relaxing and fun times I have ever had shooting blog photos, which normally feel like a chore. I am so so lucky for you both, and thrilled that we got to work together like this- we gotta do it again!

Lawrence doing final touches LOL!

Purple Backless Dress and Turquoise Animal Print Heels

This little purple number is made from a fav vintage pattern, Butterick 3867, that I first blogged about here a few years ago, but it was inspired by a pinterest image (below) that kept popping up in my feed over the fall. Apparently it’s a look from the upcoming Spring 2019 Madewell line up, and although I don’t follow their brand all that closely, I do love much of what I see from them.

Madewell Spring '16 Is About to Give You a Denim Obsession

As soon as I saw this dress I knew what a dead ringer my vintage Butterick pattern was for it, with only a couple minor adjustments. Although I love my original make of this pattern, I was excited for the chance to redo it; I made the original dress back in the day when my sewing skills were less advanced, so the old dress has a lot of room for improvement. For one thing, my mint green ladybug covered fabric, as pretty as it is, is a cotton voile, which is pretty sheer on it’s own. To make the bodice more opaque, I added a lining to it but I used a silk organza which was the best thing I had on hand at the time. As you might know, silk organza is pretty transparent, and also a bit of a strange pairing for cotton voile- while it successfully beefed up the body of the bodice, it doesn’t really flow well with the voile since the qualities of the two textiles is so different. I also used a white organza which just soaked up my deodorant marks over the years and turned the pits to a sickly green-ish yellow color (my preferred natural deodorants are made with Bentonite clay, which is a MOTHER to get out of light-colored fabric!)

The main adjustment I needed to make to create the Madewell inspired dress was to simply change the angle of the back bodice pieces so that they overlapped at the very top where the neckline is instead of the center. I basically just eyeballed this part and curved the neckline of the back instead of angling it down, then adjusted the bottom of the back bodice lines to meet up with it- everything else I kept the same.

I used a cut of beefy sandwashed rayon that I purchased at Promenade Fabrics on a trip Claire and I took to NOLA last December (SHOUT TO THE GERIATRATRIC CREW!!!!!), and I sewed this entire dress up while shooting in Vancouver this past February, which makes this dress my first #sewnawayfromhome of 2019!

It was a smart project to sew while out of town- I have learned to choose projects that I am familiar with and know will not need a ton of fitting adjustments. Aside from the hacking of the back bodice and creating a lining (the pattern doesn’t call for the dress to be lined at the bodice, but I prefer it that way since it’s basically a backless garment that I don’t want to wear a bra with- lining it gives my babygirls in the front some extra coverage and protection from the cold!), everything else was sewn according to the instructions.

This dress comes with nice, deep pockets, a button closure in the back that goes all the way down the skirt, and a lot of flexibility in terms of fitting- since the gathered skirt is essentially attached separately to the bodice (they only meet at the waistband), it’s easy to make any adjustments necessary at the very end stages of construction.

Again, I still really love my ladybug version, but this purple remix is a real win! It can obviously be dressed down, but I had no idea how chic it would look when paired with heels! I love the body of the fabric- it feels substantial and weighty, but not heavy- in fact, it’s light enough for the skirt to look really full and airy, and the sheen of the fabric in certain light makes the texture look luxurious! And my dress looks even chicer than the one in the inspo pic, if I do say so myself- the Madewell dress has drag lines and scrunching on the back bodice that looks like it either doesn’t fit well around the arms or is just baggy. Jasika 1 Madewell 0.

Now let’s talk about heels!

Inspo shoe:

Check out www.TheStyleBouquet.com #Gucci

I was very excited to get an invite to NYC in early March to take a 3-day shoe making class with the I Can Make Shoes team which is based out of London. I have been shouting them out on IG for a while now because they carry hard to find supplies and have some great free youtube tutorials available on their channel, and although I have been making heels for a while now, I figured it wouldn’t hurt to learn something new and continue elevating my skills…which I totally did! I had actually taken a satellite class of theirs several years ago when they came to LA for a one day sandaled heel making class, but the most recent class I took with them was 10 times better- for one thing it was taught by Amanda, founder of the company, who was super knowledgeable, enthusiastic, and patient with each of her 10 students, and the setup was much more efficient- 3 days gave us plenty of time to design, plan out, and implement our shoe makes, and we got to work at Brooklyn Shoe Space, a really fantastic shoe making studio in Brooklyn that offers classes on bag making, shoe making, and more. There were so many amazing machines to use at BKSS and I only knew what like, 4 of them were for- there were belt sanders and special leather sewing machines among them, but my favorite was the vented table in the basement that sucked all of the toxic fumes from the rubber cement glue out of the room so you could glue your shoes without passing out from the smell- brilliant!

I soaked up all the wisdom that Amanda and her assistants had to offer, and among the most helpful techniques I learned/clarification on was covering the heel! I have always had a lot of trouble getting a nice, clean-looking heel for my shoes out of leather, but I was cutting out the shape all wrong- Amanda showed me a way to cut a vaguely mushroom shape out of the leather and then make Y-cuts (god, I hate Y-cuts!) along the allowance edges to fold them in, then how to cover the front with a leaf and another piece of leather to get everything smooth looking. I even used a really thick suede to cover my heels and I didn’t have to skive down the edges- with her technique, everything laid down beautifully! I also learned how to make a sole that tucks underneath the heel of the shoe as opposed to flowing down the front of the heel. I actually prefer a sole that goes from heel tip to toe because I think it gives a skinny heel a little more stability with memade shoes, but it’s definitely a great technique to use for wider, thicker heels, and I am so excited to recreate them. Oh! And I also learned how to do the quick version of “welting” a shoe! It’s not really welting, of course- it’s actually just using randing as a decorative edge around the sole of the shoe but I have always liked how those looked and I never knew how to do it! I liked it so much that I bought like 4 yards of randing from my fav shoe components place in anticipation of actually learning how to do it, and YAY WOO HOO the time has finally come!

 

As you can tell, I am SUPER inspired to make more shoes with everything I have been learning! At this point I still prefer to stalk cool shoe designs on pinterest and use that as a jumping off point- I don’t have enough skills (or perhaps creativity, lol) to design shoes on my own- I mean, I’ve done it in the past, but they are not always successful. I think a lot of that comes from me wanting to make sure I create something that I am going to love and that will be wearable, and there are a lot of rules to shoe design that I am completely ignorant of. It’s much like sewing, where, for instance, you know that a woven dress will need a certain amount of ease in specific places to be wearable, and that’s just a rule of the craft that you learn early on and carry with you in all your makes. There are similar things in shoe design where, like, you don’t want the back of the shoe upper to come up past a certain point of your leg or it will dig into your ankle when walking, or how you can’t pair heel components with a pair of lasts that don’t match the lasts’ toe spring or it will make you walk funny. It’s cool to be absorbing all this information but it’s mostly through trial and error since I am self-taught, so I am slowly gaining more knowledge through copying other designs and figuring out why certain elements work and how.

BKSS has a huge wall full of stunning leathers to choose from, and although I had a good idea of what I wanted my design to look like, I was completely open to color and texture, and I figured I would wait to see what I was drawn to from the available materials. There are countless times on this blog where I have talked about how I don’t like animal prints, so it was hysterical for me to feel myself reaching for yet another animal-print leather, at the same time realizing that the last THREE pairs of shoes I have made have all been with animal print leather, lol! I couldn’t take my eyes off this blue green roll of amphibian-inspired leather, and I liked that it had so many other colors in it: it was blend of turquoise, and blue and even had a tiny hint of black in there, so, although a bold choice, I felt like it would pair well with a variety of garments.

I chose a deep royal blue suede for my straps and heels, and went with a brighter turquoise leather for the insoles and lining. I used some of my black shoe elastic for the buckle, a material I started incorporating into my shoe making after I completed my snakeskin print heels– elastic helps provide some flexible ease to your straps- if you have any strappy heels/shoes in your closet, take a look at the strap that holds the buckle around the ankle and chances are you will see a small fold of elastic doubled over  to connect the strap and buckle together. Not all flat shoes with straps have it but I have found that the majority of modern RTW heels do. It makes the shoe a bit more comfortable when walking and allows the straps to stretch out a bit instead of clinging fixed and tight to your ankle. My favorite thing about my inspiration shoe was the peep toe because it’s so tiny and isn’t big enough for a whole toe to force its way through (something that happens with me and peep toes a lot since I have a long second toe, argh!), and I think that on my next pair I will make the peep even tinier.

I am super happy with how these shoes came out, and construction and design-wise I wouldn’t do anything differently, although the sewing on one of the ankle straps is pretty atrocious- I blame it on the fact that I was using a new-to-me leather sewing machine that I was in love with, but that definitely required some fierce maneuvering that I just wasn’t skilled enough to master. Because my ankle straps were so thin, it was hard to get the edge of the strap under the needle (this machine didn’t have a bed to rest your material on, just a skinny little raised platform, so for thin straps you have to work hard to keep it from slipping off the machine). I might go back over that area on my home sewing machine if the stitches ever start coming out, but for now, it’s totally unseeable to the naked eye since that area of the strap is covered by the buckle and strap end.

Thanks once again to Claire for these glorious photos, and stay tuned for another exciting installment of my adventures in shoemaking in a future blog post…and yes, they are made of animal print!

 

 

Oslo Coat + Phillipa Pants + No Frills Sweater

Whoah! Long time, no blog, eh?? Excuse me while I get comfy and settle into these old digs…

I will not bore you with what a busy, roller coaster of a couple months it has been, but if you are on instagram you will know that I have been busy making and planning and storying, but not at all busy taking photographs. Thankfully Claire helped me rectify this yesterday in which we had a perfectly cloudy afternoon to take photos of all my blog-worthy makes from this far into the new year. Today’s blog post brings you not one, not two, but THREE makes that I am really happy with and have been wearing like crazy the past couple weeks.

First up is the Oslo Coat by Tessuti Patterns, a really popular coat pattern that I added to my list of to-makes last year when I decided I was ready to sew up this gorgeous plaid wool from The Fabric Store (I do not believe they carry this fabric anymore because I got it a couple years ago when the LA store closed down, but they have plenty of other exceptional wools to choose from)! Having already made a couple of coats/jackets for myself in the past (like this Kelly Anorak and this Vintage Vogue Coat), I was familiar with coat making but definitely want/need more experience and techniques under my belt, and I knew that Tessuti wouldn’t disappoint. Tessuti has a way of simplifying patterns that might otherwise be complicated by the instructions of a different designer, and I always enjoy sewing up their designs. I was particularly drawn to the Oslo Coat because of it’s subtle cocoon shape. Los Angeles winters are never so cold that you need a heavy parka to get through them, so I knew a casual, relaxed fit such as this would serve me well, and it has (although it has been uncharacteristically rainy this season, which no wool coat is perfectly suited for, but that’s another story)!

As expected, the instructions for the Oslo were straightforward and easy to apply almost all the way through. This coat is designed to be lined and I decided to quilt the blue-gray silk I used with cotton batting, a choice I am oh-so happy with. No, it technically doesn’t get that cold here in LA- particularly if you are visiting from the east coast. But if you’ve been living here for a while, your tolerance of coldness changes and 50 degrees can feel like it’s absolutely freezing (yes, there is a scientific reason for this, something to do with the way your blood changes over time in certain climates, so don’t @ me!). Anywho, I didn’t use full-on Thinsulate, but I wanted a little something to beef up the coat and keep me warm on the chillier days. So I cut out cotton batting to fit my cut of silk yardage, pinned the layers together like I was making a quilt, then spent a few hours on my straight-stitch vintage Singer with my quilting attachment, sewing straight lines in one direction and then again at 90 degree angles across the whole length of fabric. There were definitely some wobbly lines and less-than-perfect angles but I knew they wouldn’t be obvious once inside the coat. After all my quilting was done, I cut out the lining pieces from the pre-quilted fabric and I serged the edges to keep the silk from fraying too much (I also serged my wool pieces once they were cut out because this wool wanted to fray like crazy as well).

I didn’t make any adjustments to the pattern other than in length- I cut off about an inch and a half from the sleeves and a little bit more from the body of the coat, but I missed one important detail here- the body of the coat has it’s lengthen/shorten lines at the hem instead of somewhere further up the coat, like at the waist or hips, which means that when you adjust the length, the pockets stay exactly where they are. This becomes an issue if you are more petite like I am, because the length will shorten but the pockets will stay at the height of someone much taller. The result is that once I inserted all my side pocket details and finished them up, I tried the coat on for fit and the pockets were so far down that my fingers couldn’t even touch the bottom. This was awful news, for what’s the point of having a pocket if you have to literally hold the pocket up with one hand and fish around with the other to get the contents out of it?? Totally my mistake, of course, but I guarantee you I won’t ever make it again! There was no way I could remove the pockets without sacrificing the integrity of the fabric in those areas since the wool got so fray-y and there was so much topstitching that would rough up the textile once unpicked, so I left the pockets as they were and sewed the pocket bags of the lining a couple inches shorter so that there was less depth- thankfully they are drafted with a ton of room so losing that area didn’t affect the functionality of the pockets at all. They are still quite a bit lower than I would prefer, but definitely still usable.

My other snafu is a two-parter that involved inserting a bound buttonhole on the coat. Bound buttonholes of course are meant to be applied before the lining goes in but this meant that I had to base the button placement on where the pattern says it should go vs. where it fit best on my body. Because I made a straight size and didn’t grade up at the hips like I normally do (I figured there would be plenty of ease in the coat to accommodate my butt), the coat gets tighter at my hips- not so much so that it doesn’t fit or isn’t comfortable, but it means that the closure needs to be further to the outside so there is more room in that area. As designed, the button placement makes the coat tighter around my hips which becomes apparent because of the straight vertical lines of the plaid that- when I buttoned it with the original buttonhole, got wavy and shifted inward instead of staying vertical. Ah, hindsight! To remedy this, I just added another bound buttonhole on the other side of the jacket (meaning it closes the opposite way it was intended to) in the proper place that made sense on my body, and I sewed the unusable bound buttonhole closed and covered it with a button (the original design is only supposed to have one button but mine has two, lol).  Although I would love to have foreseen these issues from the beginning, I am totally happy with how I ended up fixing my mistakes and I don’t think the average person would recognize that there was any issue with it at all. I used fabric-covered buttons for this coat which I think looks really sharp and makes the two buttons look more intentional and I also added a loop to the back center neck so that I hang it on a hook if necessary

Before bagging out the coat, I decided to add an inside welt pocket to the lining (which I was contemplating doing, then decided against it at the last minute cause I just wanted to finish the damn thing, but then I saw that llaydybird was making a coat at the same time as me and she made herself an inside welt pocket that came out beautifully, which felt like a sign for me to not be lazy and just get her done!) and I am so happy I did because this pocket is a bit easier to use in terms of putting stuff into than the side pockets of the coat (see above snafu number 1).

The only other issues I had with this make were at the very end when it was time to bag the coat out. There is an approximately 2 inch allowance required for bagging out the bottom of the coat and the sleeves, and for some reason unknown to me, that allowance just didn’t work. 2 inches created a bubble at both hem and sleeves meaning there was too much fabric folded up in there, so I had to go back in, unpick all the hand stitching at those areas and decrease the allowance. I am assuming this has to do with something I did (or didn’t do) and not the pattern drafting, and I think it just comes with the territory of getting familiar with new techniques and working with thick fabrics like wool and quilted fabric. Regardless, I was able to fudge the bagging enough that it mostly lays smooth at the hem and the sleeves are perfectly flat.

All in all I LOVE how this coat turned out- I love the easy, relaxed fit of the raglan sleeves, I love the dramatic fold-over collar, and I love the roominess inside- you can wear a super bulky sweater or even a light jacket underneath and it won’t feel too tight or uncomfortable, and I end up mostly styling this coat to wear open with a lot of layers underneath. Although this is designed as a big comfy cocoon-type coat, I actually prefer it more as a jacket- this is not the garment I reach for when it’s super cold outside. Because I beefed mine up with a quilted lining, it’s certainly warm enough to endure some very chilly Vancouver days (which is where I first wore this make), but because it doesn’t close at the neck, it is not an ideal cold weather coat for me. My preferred coat is actually just a giant scarf that covers up every inch of my chest and neck, lol. For me, to provide adequate warmth, I have to layer this coat up with turtlenecks and scarves, and even then I find myself clenching the collar closed with my hands so no cold air will touch my neck. I considered adding a hook and eye or something to the neck to close it up should I ever need to wear it for colder temps, but I might just relegate this make to cool-not-COLD weather wear and call it a day!

Whew! That was a lot of coat talk! Okay, next we have the Phillippa Pants by Anna Allen Clothing, sister to the Persephone Pants that everyone (including myself!) went gaga over last year. These pants did not disappoint at all, although I did make some changes to them that I should probably continue to work on for my next pair. I love both these designs because of the high high high waist! High waists are not for everyone, but as someone with a long torso and shorter legs, high waists make me feel like I am taller than I actually am and I just love the silhouette on me. They also make me feel more comfortable than lower-rise pants do- there is no risk for buttcrack peepage and I don’t spend my days pulling the pants up by the belt loops to keep them from riding down. The leg shape on the Phillippas is very interesting- it’s a totally straight side seam allowing you to use selvedge denim which is awesome, but it also means that the legs don’t curve at all to your body’s shape, and although I like the idea in theory, I am not quite sure it works on me. When I basted the side seams up and tried them on I immediately thought they needed some work and got to molding the legs to fit my thighs and calves. I might try and leave them as-is next time though- it’s a style I am not used to but it might just be because of habit rather than preference (fine line, ya know?). Because of my tinkering, I think the area around the knees could use a bit more attention- I feel like they look baggy and wrinkly, which is actually an issue I experience a lot of with close-fitting pants, so I should probably look that up in my Pants Fitting For Real People book and see how to fix it.

With these pants I made a size 2 graded to 4 at the hips, and I lowered the opening of the button fly 3/8″ to give my hips plenty of room to get in and out of. Like with the Persephones, I had to take the back darts in about an additional quarter inch, but I kept the waistband straight instead of making it curved like I normally do for pants. Because these pants sit SO high on the waist, and because I already have a low butt, I actually don’t need the curved waistband at all- my body is pretty straight up and down where the waistband of these pants hit. I decided to give the button fly technique used on these pants a second try even though I disliked it so much the first time with the Persephones- I thought maybe I had made a misstep in the construction or something and I wanted to give it another go. Nope. Still don’t like this technique at all. It came out better than my original pair of Persephones which were so bad I had to take the whole thing out and start over with a different technique, but that’s not saying much. I prefer the Closet Case zip fly method or even the Lander Pants button fly method, and if I am not mistaken, both of those employ the “basted closed” method, which I think ends up looking much neater and cleaner.

As far as a woven, non-stretch high waisted pant goes, this pattern is pretty terrific, and I am eager to compare it to the Megan Nielsen Dawn Jeans which are a more traditional jean style with the same high waist as these. I don’t remember where I got this black denim from but I believe it’s Cone Mills, and it’s very good quality. As suggested, I made these pants really tight so that they wouldn’t bag out after wear, but I could have made them even tighter- I have only successfully nailed down the ‘non-bagging tight woven pants’ fit once before, with the yellow Persephones I made last year. These are close, but not quite as good at not bagging out after a day of wear. After a few hours I notice that the main place they bag out is in the yoke area of the pants (there is no actual jeans yoke on this pattern, but it’s where the yoke would be- back of pants, below the waistband and above the pockets), and this is actually where all my high waisted woven denim pants bag out, which makes me wonder if I should take out a horizontal wedge from this area on future pairs, grading to nothing at the side seams. It’s definitely worth a try! One thing I didn’t notice about these pants until I tried them on is that they have no front pockets! I am actually fine to just use the back pockets since they are a good size and fit my phone easily, but still it’s something to keep in mind if you prefer front or side pockets on your jeans.

I dont like using jeans buttons with button flies because I think it gives too much wiggle room in the fly area where I want it to be very fitted and tight, so I used Abalone buttons from my stash for this pair. I am on the fence about them, mostly because they keep falling off! While I don’t like the extra room jeans buttons provide, I do like the stability of a hammered button, so I am on the lookout for some flat denim buttons, and in the meantime I might just have to sew some nylon thread through the buttonholes and then melt the ends closed on the other side to keep them in place.

OKAY, FOLKS, we are nearing the end! To close out this interminably long blog post, I will briefly share with you my No Frills Sweater, a pattern by a knitwear designer named PetitieKnits that I randomly found on instagram when I went down a rabbithole of handmade sweaters last year- I was itching to get back into knitting and I thankfully found a lot of inspiration on IG to bring my knitjo back. The No Frills Sweater, like all of PetiteKnits other designs, is very simple but has a beautiful shape, and I have learned that I much prefer sweaters made with thinner yarn, like fingering weight, than I do bulkier Sport and DK. Knitting in fingering weight creates more of a drape-y fabric, which fits my current style and sensibilities in a way that thicker sweaters dont (and again, I’m sure much of this has to do with living in LA).

My skin is very sensitive to 100% wool so I have been using blends with merino, cashmere and nylon/cotton/bamboo lately, which has made a huge difference. I used a Caroline Toes gradient set from Miss Babs Hand Dyed Yarns for this sweater, and it is incredibly soft, only minimally itchy, and a joy to knit up. Of course I ended up running out of yarn to complete the sweater as designed, so my sleeves are only half length instead of full, but I’m still happy with how it turned out, and because the yarn isn’t super thick, I can get away with wearing this garment almost like it’s a t-shirt. I had never knitted up a color blocked or gradient sweater before, so I had to be careful with how much yarn I used so that I would have enough of each color for the sleeves. I didn’t use any specific technique, I think the yarn gods were just on my side to have me eyeball the lengths of yarn I needed so accurately.

This sweater is very uncomplicated, but I did have a bit of confusion around the yoke area which I think comes from the pattern being translated into different languages- the instructions are in english but are written/structured a bit differently than most I have worked with, and it took me a while to understand them. I actually completed the yoke and then immediately frogged it and started it over once I got the rhythm of what I was supposed to be doing with the short rows for the back yoke. But once I had that part to my liking, the rest was just stockinette all the way through, which was nice and relaxing to come back to after such a long hiatus from knitting. I never blocked this sweater once it was complete because it didn’t seem to need it, and I am really in love with the fit. It feels loose and relaxed but not boxy or too big for my body, which has always been a struggle for me with knitted sweaters, and probably one of the reasons I took such a long break from making them.

Thanks to Claire for taking these fantastic photos for me, and thanks to you for getting this far in my blog post! It’s always a joy to share my makes here, from what I learned and loved to what I would do differently next time, and I appreciate you taking the time to read 🙂

Sointu Tee Hack

This was such an unexpectedly fun (and quick!) dress to make! I was moderately impressed by the Sointu Tee by Named Patterns a few years ago when I made it while filming in Savannah, GA, eventually pairing it with my Sasha Trousers, and while I love the way it looks and fits, for some reason it’s just not the first garment I reach for in my closet. Perhaps because I made it in a really nice merino blend from The Fabric Store which makes the top very warm and cozy, contradicting the fact that it is essentially a short sleeved blouse designed for warmer weather. The window of opportunity to wear this “tee” in the fabric I made it from is pretty small. But still, in terms of the design elements, I love the silhouette of the dramatic sleeves, the cinched in waist, and the big belt. As always with Named patterns, the garment is kind of huge on me, even though I always make the smallest sizes offered, so if you are petite and checking out this brand for the first time, one of the (many) suggestions I would make would be to size down a bit, if possible.

Anyways, I hadn’t made the Sointu Tee (often referred to as the Kimono Tee) for myself again after my gray wool version, but I stumbled across a photo of Corrine Bailey Rae on pinterest wearing a dress that seemed to be a dead ringer for the Sointu Tee as a foundational pattern. I was drawn to Rae’s dress because of the supple, pillowy looking fabric (and also that color!), the slightly oversized fit, and the super thick belt that managed to pull the whole look together. I also loved that sweet, simple, yet effective neckline. The actual details of the dress look about as complicated as a paper bag, and yet it’s still such a chic, elegant and fun looking garment!

I shared the image on my IG stories a while back, explaining that I was looking for comparable patterns to match with some inspo outfits, and although I had a few ideas in mind for some of the garments, I was interested in hearing what suggestions others had to offer. For this particular dress I was eyeing either the Sointu Tee as a hack or the Sew House 7 Teahouse Dress, but then an IG follower sent me a photo of the dress she hacked out of the Sointu Tee pattern to great effect and it looked terrific, so I was sold! 

I initially hoped to find a pastel-colored fabric to work with for this project like the one from the inspo pic, but I found a really cool black twill ponte at The Fabric Store instead, which seemed like a smart idea. If a project you haven’t made before goes south, it’s way easier to cover up any flaws in black fabric than it is in pastel mint green! I did have a couple of flaws that I needed to cover up, but nothing too horrible. 

The Sointu Tee is a very simple project to make and it’s great for beginners. As mentioned above, one of the things I don’t really love about Named Patterns is the fact that their fit tends to be so generous, and part of this is because they rarely specify what fabric a design should be made out of – I guess maybe they want sewists to be able to make them out of whatever fabric they want, whether it’s knit or woven? But I am of the mindset that not all designs translate well from knit to woven, so the drafting should be adjusted accordingly- the result is that the smallest size in all the patterns I have made from this line have been entirely too big. However, this works very well in the favor of a newer sewist- more ease drafted into the pattern means less headache trying to get each part to fit perfectly. This pattern has no sleeves to set in, and only two main pieces to work with- the belt, loops, sleeve and neck bindings are simply smaller rectangular pieces that won’t require any fitting or adjusting for most projects. 

For my hack, I made the following changes:

  • added a seam allowance on the front piece so that it is no longer cut on the fold; this was the best way for me to achieve the split-open neck detail on the front. 
  • extended both front and back pieces to my desired length (about 18″) and widened the side seams of both pieces to around 1/2 inch at the hem, grading to nothing at the waist- there is so much ease drafted into the tee that I didn’t need to add any more around the hips and thighs, but I did extend outwards a bit to keep the flow of the side seams intact.
  • adjusted neckline on the front so that it was slightly lower and accommodated the neckline detail (cut a narrow ‘V’ out of the top 3 inches).
  • widened belt and belt loops.

Unfortunately I made a few mistakes along the way despite my insistence on what an easy hack this is to complete. I forgot to interface my belt, which may or may not be a problem in the long run- the ponte is pretty thick and bulky so I don’t imagine it will stretch out considerably during wear, but it’s still something I should have done. I also tried to top stitch each side of the front center seam of the dress as illustrated in the inspo pic, which would work on some fabrics I’m sure, but not this one- it made the seam wavy and warped and I had to unpick the stitches and then steam the crap out of it to get it back to the original shape. Thankfully the top stitching around the neckline detail laid down beautifully and didn’t need to be ripped out. However, the next time I make this, I will allow for extra seam allowance at the front center pieces so that I can make a wider band of topstitching down the front, as in the inspo pic- I love that detail but didn’t pay attention to it properly to make it work for my garment. I didn’t interface the sleeve bindings because my fabric was stable enough to not need it, but depending on the fabric used, you can keep or omit it (I have seen other sewist’s comment that this was an unnecessary detail so I think most people skip it like I did). 

Other than that, the dress came together incredibly quickly. The most time I spent on it (after all that unpicking of the front center wavy topstitching!) was hand sewing the blind hem- and FYI, because the dress has a slight curve to the bottom depending on what you did with your lengthened seam lines, you might need to baste the hem first before sewing it down to ease in that extra fabric. I also had to adjust the position of the belt loops to my liking- I ended up raising mine to be really close to the under the arms because I don’t like the belt hitting my actual waist, I prefer it a bit higher for this silhouette, right around my ribcage. 

And that’s it! I was very lucky to have my talented friend, fellow actor and spin instructor, Jess Nurse, take these blog photos for me when we got together to do a fun photo shoot a couple weekends ago, and they came out SOOO great! Unfortunately, as with most black clothing, it was really hard to show all the details of this make without zapping all the color out of the images, so you have to squint kind of hard to really see the details of the belt and drape of the fabric; but honestly, this is such a simple make that there isn’t too much you have to imagine on your own, and I hope you can get the feel of the dress despite the black fabric!

I also wish I had been wearing my newly made furry heels in these photos, because I was inspired to make them in this leather and texture after I started making this dress- I thought the two would go beautifully together, but alas, the soles were still waiting to be glued when we took these photos. No worries though- I have other outfits that I think these shoes are gonna look KILLER with, so they will have their chance to shine on the blog eventually!

https://www.instagram.com/p/Bs6hZkDhUdv/

And lastly, here are a couple of really fun shots Jess got that don’t quite show off the dress, but still evoke a pretty fantastic LBD mood…thanks again, Jess, for sharing your talents with me!

Plaid Shirtdress

(side note: I did a slight trim of my hair about a month ago to give it some more body around my face and I now that I am seeing these photos I took before the trim, I am already regretting losing the length I had in these pictures, lol- THERE IS NO WINNING WHEN IT COMES TO MY HAIR LENGTH!!!)

ANYWAYS. Back to the make.

I’m not sure what inspired me to make this dress- it wasn’t a pinterest image or someone walking down the street in an amazing ensemble that caught my eye. It was more a project of convenience- my stash fabric had grown considerably after The Fabric Store in LA closed down, and I was able to bring home lots of beautiful cuts of fabric and leather at deeply discounted prices as they cleared their inventory. A lot of pieces came home with me even though I didn’t have specific project ideas for what to do with the fabric, and this cotton plaid is one of them. I liked it because of the color palette, but the hand of the fabric is…interesting.

 

It’s not exactly rough, but it isn’t soft either. It kind of feels like paper, and it’s surprisingly lightweight considering how it looked on the roll. I assumed I would make a button down shirt from it, but when I pulled it out of my stash to find some inspiration, I realized I wanted something a bit different than a shirt- I didn’t really need another button down in my rotation. I knew I had just enough fabric to make a shirtdress using a pattern I had made before with this Velvet, Gold and Pussy Bowed make from last year, so I pulled out my pattern pieces and got to work.

For the velvet dress mentioned above, I had to make some adjustments to Vogue 8829  because the pattern calls for a woven and my velvet had stretch. I also made adjustments for all the extra ease that was included in the pattern, so on this make, I had to re-trace several pieces of the pattern as they were originally drafted to accommodate my woven plaid. There is a ridiculous amount of ease in the waist of this dress that was present even after I sized down and took in the side seams a bit, so I created a sort of box-pleat in the back of the bodice to size the dress down even more and I was able to adjust the skirt pieces accordingly.

Because this is a plaid fabric and I already had a limited amount of yardage to work with, there is a LOT of piecing together and pattern mis-matching at play here, but it’s nothing so glaringly awful to me that it makes the dress unwearable. The button bands and belt were pieced together from like, so many tiny remnants of fabric I had left after cutting out all the major pieces, but because it’s plaid and kind of busy, you can’t really see the details of it too much unless you look close, and looking close makes it seem a bit like an artistic choice!

Speaking of the belt, this was something I made for the dress of my own accord. Even after adjusting the back bodice piece and the side seams, the waist was still a bit looser than I would have liked, so I decided that adding a belt would not only help keep the waist nice and firm on me, but it would also give the dress a visual break at the waistline- the dress without a belt looks fine on my gold stretch version, but this one needed something to break up the flow a bit.

Instead of just creating a long fabric belt and belt loops, I decided to use a design element that I loved from my The $34 Dress and I sewed the middle of belt onto the dress at the back waistline to keep it in place. This means of course that I can’t wear any other belts with this dress, but I am 100% fine with that; I am not much of a belt (or accessories in general) kind of person and 9 times out of 10 I prefer to use a fabric belt made of the same material as my garment.

As a whole I am…fine with this dress, lol. I have worn it a few times now and it feels like a good staple to have in my closet, but I am still not crazy about the fabric. I love the print, but as mentioned before, something about the texture/hand of the fabric is a little off for me. I wish it was a little more supple and soft- something closer to a brushed cotton or a flannel (without the heavier weight) would be great. It works really well for a warm weather dress since the fabric is so breezy and lightweight, but the design and print visually seem more fitting for a fall/winter garment, so it seems to be crossing into different territories without landing firmly in either one. Regardless, I know I will continue to get good wear out of this dress, and I appreciate being introduced to this style of garment as a closet staple- now that I have a button down dress of this length and silhouette, I definitely want to add another, perhaps in a longer length and with a fuller skirt? We shall see what the new year brings!

Sew Frosting!

 

I’m sure many of you are familiar with the #sewfrosting hashtag that recently started trending on sewcial media. The #sewfrosting challenge is the brainchild of the creators behind True Bias and Closet Case Patterns. It is a call to arms for sewists across the globe to take a little break from sewing cake- cake being the sturdy workhorse portion of our garment sewing, like t-shirts and jeans and button downs- and spend a bit more time sewing frosting, the fancy, frilly, sweet, delightful garments that we perhaps have less opportunities to wear, like cocktail dresses, shiny pants, floral suits, etc. Although I wasn’t calling it by this name, I have been a big proponent of sewing frosting for a few years now. I always used the hashtag #redcarpetDIY because these were the garments I would have a chance to wear when going to work events and promoting tv/film projects, but I might need to go through all my old blog posts and add #sewfrosting to the hashtags now since it is so succinct. I like that the term “sewfrosting” represents something both specific and broad at the same time,  encompassing so many in the community- sewing frosting will look very different to different people, depending on their style, gender identity, culture, habits, ability and even geographical location, but this hashtag allows us to celebrate it all together. Whether your frosting is a gown to wear to an awards ceremony, a fancy pair of pants for church, or a simple shawl made of beautiful lace, it feels like there is room for us all in there to celebrate the idea of challenging ourselves, with fabric, design, and trends. Kelli and Heather Lou turned the #sewfrosting hashtag, which has apparently been around for a while,  into a bit of a contest with some prizes and deals to compete for if you create your garment before the end of November, but let’s be honest- the real prize here is adding something exciting, new and unique to your wardrobe!

My original idea of frosting was inspired (of course!) by this dress I found on Pinterest. I love love love the plunging neckline and armholes that manage to bare some skin but not look too revealing, and although my drafting skills are amatuer at best, I thought I could manage to recreate this look without too much trouble. Unfortunately I was wrong- I got all of the style lines right when I draped this on my dress form, but I couldn’t figure out how to get the sides of the bodice to not gape out around my bust. Initially I thought that perhaps my bust was fuller than the model’s in the photo and therefore this was not the perfect bodice for me, but then I realized that I might have been approaching the shape all wrong- maybe it wasn’t created from darts as I assumed, but created from panels, kind of like a strapless bodice. So I pulled out my trusty TnT strapless dress bodice from Gertie’s Ultimate Book of Dresses and I started the process of hacking the pieces to match the shape of the Pinterest inspo dress…but then I got impatient. I decided I wanted to spend more time on something that I knew was going to come out successfully rather than something that was going to require a lot of experimenting and testing to get right. And this made even more sense because I wanted my submission to get in before the deadline and I didn’t want to run out of time!

Before I aborted my original plan I knew exactly what fabric I wanted to make my #sewfrosting in and thankfully the fabric translated easily into my new plan. The fabric is a beautiful, geometric jacquard purchased from The Fabric Store in LA many months ago, and it’s been sitting in my stash just waiting for the perfect opportunity to be used. This fabric is medium weight with a lot of body, and I knew I wanted to show it off by sewing it into something with a big shape.

My first idea was a strapless bodice with a big wide poofy skirt, but because I am obsessed with jumpsuits right now, I kept coming back to the idea of trading the big skirt for some big pants. Immediately the Winslow Culottes by Helen’s Closet came to mind because of the pleating at the front and back and wide legs- that garment actually looks like a skirt when you’re standing still and it seemed like a really interesting pairing to match with my bodice, but I worried that the body of the fabric wouldn’t marry well with the style lines.

What if it gave out too much poof, or not enough poof, or just ended up looking dowdy? I tried to take my uncut fabric and fold it around my body to give me a good idea of how the end result would look but it was practically impossible to tell, so I took a leap of faith and just went for it- worst case scenario was that it wouldn’t look good at all and I would have to cut shapes out of the pants pieces to create a skirt (which wouldn’t be too hard to do since the pant legs are so wide). With a little urging from sewcial media I went forward with my plan and ultimately it came out beautifully! I wouldn’t change a single thing!

Okay, that’s a lie- I totally would change the fabric of the lining that I used, lol. I cut out my pieces from my fashion fabric, then cut out the same pieces from hair canvas to give the bodice additional stability, and then I cut out another set of pieces from some black silk organza in my stash to make the lining (I opted to create channels for my boning by sewing them onto the lining and hair canvas instead of using separate channeling). I didn’t really have any other fabric in my stash to make the lining out of that would match the color scheme of the fabric and I thought the organza would provide yet another layer of stability for the bodice, so this seemed like a great idea at the time.

Unfortunately I didn’t take into account how scratchy the hair canvas in the middle of the bodice would end up being- it was so itchy that it poked through the organza and immediately started irritating my skin when I first tried the garment on. BIG FAIL! It was so bad that I knew I would have to make some sort of adjustment or the garment would be unwearable, but taking the whole thing apart was out of the question- the bodice was literally ENTIRELY complete: under stitched, hand stitched closed at the waistline and everything! I didn’t have the time or patience to dismantle the whole thing since I had a bunch of birthday gifts to sew for claire, and I also was just NOT FEELING DOING ALL THAT WORK.

So I had to come up with a quicker fix that would work almost as well as replacing the entire layer of organza lining. I opened the bodice back up from the waistline seam and I decided to fill in the spaces between the boning with another layer of silk (this time a white silk habotoi from my stash) to serve as a buffer between the hair canvas and organza lining. It was tricky, imprecise, and took some very delicate maneuvering- I cut out the rough shape of the space needed to be filled from my habotoi silk, carefully slid it into the area underneath the lining, then stitched around the edges of the organza and hair canvas to keep the silk in place. There was one triangular space at each of the top sides where the opening was simply too tiny to stuff the silk into, but I was able to effectively cover the hair canvas everywhere else in the bodice. I wasn’t sure how well it was going to work, but thankfully it did the trick, and the two spots that aren’t covered with the habotoi seem to be too small to be of major concern. I tried the garment on and my skin didn’t start turning red and getting itchy- success!

Other than that snafu with the bodice, everything else came together beautifully. The Winslow Culottes pattern is a STUNNING match for this fabric- I love how the pleats puff out from the waistline and how perfect the length is, and I did some very careful and successful pattern matching on the pieces, too. I changed the shape of the pockets on these pants as I wish I had done on my original pair. They are designed to have a teardrop pocket that hangs from the side seam, but I prefer my side seam pockets to be drafted to the waistline and sewn down into the waist seam which keeps them in place and makes sure they dont wiggle around, get bunched up, and bulk up the silhouette of my hips. I re-drafted this pocket by raising the height to match the waist of the front pants piece and it came out beautifully.

One thing I find hilarious about this make is the fact that used the same black organza for the pockets as I did for the lining- organza is strong and soft, so it seemed like a reasonable thing to do, but I didn’t take into account that this would give me transparent pockets, which you can get a tiny peekaboo at when I pull them open on the sides. This was a happy accident- I LOVE a little peek of skin in an unexpected place! I just need to make sure that my underwear match the fabric a little bit more, lol!

 

All in all I am thrilled at how this garment came out and I am so happy with the journey I went on to get here. I had such different ideas for how I wanted this piece to look at the beginning of the project, but I came out with something entirely unique and very me. This isn’t to say that I won’t give my original Pinterest dress another try at some point in the future, but I am really happy with where I ended up and I probably wouldn’t have created this strapless jumpsuit without starting from where I did. The marriage of fabric and pattern here are so exquisite and this is one of those garments that I haven’t really seen around before- it’s a dynamic shape in a bold print, and I feel so special in it… kind of like a dollop of frosting! Mission accomplished! Thanks for the inspiration, Kelli and Heather Lou!

P.S. Photos by Claire Savage (thanks, honey!)

Hacked and Wrapped Peppermint Jumpsuit Take 2

It’s Thanksgiving and I have a LOT to be grateful for, y’all! Thanksgiving has always been a tricky holiday for me, which I think I have discussed before on this blog at some point. It’s one of those cultural traditions that I just accepted when I was growing up without giving it much thought, but as I got older and started questioning so much of the history that I was taught in the Alabama school system I attended, I began to realize how complicated it is to uphold traditions that are dear to us while also being aware and even critical about where they come from and what they represent. On the whole, spending a day with family (chosen or otherwise) to break bread (gluten free or otherwise) and celebrate all you are thankful is an absolutely honorable and lovely thing to do. But it is so closely tied with excess and consumption (both of food and black friday deals), and so often separated from the horrors of all the indigenous life lost in the name of this holiday, that it can be really frustrating to know how to celebrate it appropriately. Of course I don’t have an answer for how to do it, and even if I did, that would assume there was a “right” way. All I can do on this day is try and make enough room for all the contradictions that exist within and around me- being thankful for my wonderful, supportive relationships with friends and family, for my loving, encouraging wife, for my health, for my body and all it is capable of, for therapy, for the roof over my head, for the food being cooked in the oven at this very moment, for my brother’s recovery from illness, while also saving space for the fact that so much of what I am thankful for is rooted in privilege- financial privilege, class privilege, able-bodied privilege, gender privilege, geographical privilege and more.

It’s interesting to imagine what all I would be thankful for if there weren’t so many inequities among us all.

Today I am also thankful for the firefighters (both incarcerated and not) for all the hard work they do to keep us safe. I am thankful for the sewing community- the support, encouragement and laughter generated from almost every interaction I have with some of you brightens my days and continues to inspire me. And I am thankful for being an ambassador to The Fabric Store, which keeps challenging my sewing practice, elevating my makes, and ensuring that my stash is stocked with so many divine textiles. Which leads us to our regularly scheduled blog post…

Normally I don’t put several versions of the same make on the blog, because I don’t often have all that much to say about a variation on a pattern, other than “I must really love this thing to keep making it” and “ooooh, look at this pretty fabric”! But the Peppermint jumpsuit that I hacked (thanks to inspo from some other amazing sewing bloggers) got so much attention that I figured it was smart to talk about it on the blog again, especially since I knew I wanted to make it in a slightly dressier fabric compared to my casual, summertime striped linen version.

I really do love seeing how much a pattern can be transformed when you pair it with different textiles and prints. Cotton and linen tend to have a crisper feel against the skin and a more relaxed vibe when sewn up in designs like pants and jumpsuits, but a softer, drapier, more luxurious fabric can make the same design look red carpet ready, and I was excited to see how elevated this fun (and free!) Peppermint/In the Folds jumpsuit hack would look in this gorgeous crepe rayon I got from The Fabric Store. The color I used for this make is lapis (french blue) but they have several stunning hues in this fabric and I have a couple other cuts in my stash that I have yet to dig into- I’ve just been waiting for inspiration to hit! The fabric is silky and flowy but the crepe gives it a nice surface texture that I love, which also makes it shimmer a bit in the light. It’s not transparent but it is lightweight, so I think it works best for a garment that has some ease or some pleating/gathering/folding which allows the fabric to move and dance and catch the light.

Since I had already made the hack once before, this garment was pretty straightforward to create, but I did adjust the legs a bit; the original drafting of the Peppermint Jumpsuit has a significant amount of ease in the legs (particularly around the thighs), which can be seen in all the folds created around the midsection of the garment, which is cinched in by the belt. I made the legs a bit narrower in my first hack with the striped linen fabric, but I brought the seams in even more (on the outer leg) for this crepe rayon version. They tend to bulge out a bit at the sides and look like clown pants, perhaps because of all the other adjusting I did to the top half of the pattern, so tapering them in on the sides gave a much cleaner, more classic silhouette. Everything else was pretty much the same- I created french seams on all the main seams since rayon tends to fray a lot and I prefer clean finished insides for this kind of fabric. Surprisingly I didn’t need to sew in bra strap tabs (I don’t know what the real name for this is, but it’s when you sew snaps onto a little cut of ribbon and place it inside the shoulder seam to keep your bra straps connected to the garment when either one of them likes to slide down) like I did on my striped linen version- I would think that a slinkier fabric like rayon would want to slide down much more than linen would, but the opposite turned out to be true!

One question I got asked a lot about this hack was whether or not you could create bias strips to enclose the raw edges of the neckline/wrap, and there is a way you can do it, but it will involve adjusting the way the front wrap gets attached to the crotch seam, and possibly a redrafting of that area- I think you would need to add seam allowance to the top of the crotch seam edge so that you can flip the bias-edged wrap under and connect it to the seam that way. But I haven’t tried it on this pattern and I’m only working it out in my head so that could be totally wrong, lol. I actually prefer creating a facing for the neckline that gets sewn to the jumpsuit and then under stitched because it provides a lot more stability to that area, which is cut on the bias and has a tendency to stretch out like mad. In fact, I learned after making this second version that it is essential to stay stitch the entire front and back necklines of your pattern pieces as soon as you cut them because they will want to morph out of shape as soon as you start moving the fabric around.

To create my facings, I just traced the edges of my front and back necklines on transparent pattern paper, and then I widened the shapes so that they were about 4-inches all the way around. I interfaced all the pieces, sewed the back halves together, then sewed the back piece to the front pieces at the shoulder seams. Next, I sewed the whole facing piece onto the jumpsuit, pausing at the area where the belt is attached so that I could sew it in the way I like (I prefer my wrap front to maintain it’s triangle shape at the edge, which means I can’t sew it to the belt like normal and just flip it to the right side- but if you don’t want to go through the trouble of all that, you could sew the edge flat instead of pointed).

And that’s all she wrote! I love the way this jumpsuit fits and feels (although this fabric gets a little wrinkly!) and I think I might add a little vintage romper slip (to match the fact that this is a jumpsuit) to my list of future makes because I wouldn’t mind having one more layer of fabric under this thing. I love the color, I love the effect, and I love how I look in it- I can’t wait to wear this for an #auditionlewk when I go in for Recently Divorced Mom In A Small Town Trying To Get Her Groove Back While Going Back to School to Become A Beautician 😉

Happy Thanksgiving if you celebrate it, and Happy ThanksLiving if you don’t!

 

 

 

 

Boiler Suit Pattern Testing

I’ve never pattern tested before because I like to limit my “deadline sewing” as much as possible. Sewing with the pressure of a due date takes the fun out of the craft for me, so, with the exception of being an ambassador for The Fabric Store and sewing up holiday gifts for others, I just don’t do it very often. However, sometimes my trycuriosity gets the better of me and I will say yes to things I haven’t done before so I can at least have the experience under my belt and know whether I like something or not based on knowledge instead of assumptions. When Alice & Co. reached out to me on IG and asked if I was interested in testing their new Intrepid Boiler jumpsuit pattern (how did they know I was on a major jumpsuit kick???), my instinct was to say no, but then I saw an image of the design. It was essentially the Madewell one-piece that inspired this jumpsuit, the one I saw Heather Lou in, fell in love with, and then consequently tumbled down a jumpsuit rabbithole in an attempt to recreate it! If you read that blog post you’ll know that I diverged from my original inspo and, while I love where I landed, it’s different from the utilitarian, no-frills jumpsuit that first caught my eye.

Well, surprisingly, the Boiler Jumpsuit ended up being the answer I needed all along! And now I am glad I didn’t waste too much time trying to cobble together a pattern for it because this one is surely better than what I would have been able to hack. This jumpsuit was a relatively simple make, although there are of course some changes that have been made since the tester versions went out. I think the majority of the changes address design details as opposed to fit details, and my jumpsuit fit really well right off the bat.

The tester pattern was comprised of sleeves, a yoke, front/ back bodice, pant legs and pockets, and the waistlines of the bodice and pant legs have extra seam allowance included so that you can baste the pieces together and decide how much or how little room you need for comfortable bending and moving around. You know how some indie pants patterns give an inch of seam allowance at the side seams so that you can adjust as needed throughout the hips and leg area? Well this pattern allows you do that when connecting the top and bottom of the jumpsuit and it is super helpful to have included. Since the general fit of the jumpsuit is loose, the length through the torso and waist was the only area I needed to adjust, and the extra seam allowance makes this very straightforward and efficient.

I was surprised to see that there were no side, slant or patch pockets included in the tester design, and I had no idea how much I was going to miss them til the whole garment was completed and I tried it on and realized that my hands were aching to be jammed into something (that’s what she said); the jumpsuit is just so functional looking and utilitarian that to wear it without pockets felt wrong- where will I put my tools? My candy cigarettes? My lovenotes?? So I went back and added patch pockets to the front legs of mine after it was already finished, only because they were simpler and quicker than taking the legs and waistband apart and drafting a whole pocket. I think the patch pockets work fine on this (I used the pattern pieces from my Madewell hack) but a regular side seam pocket would be great, too.

Unfortunately I can’t speak much on how well the instructions are written because the ones for the tester version were sparse in a couple of places and they said they added more information but I’m not quite sure what they look like; I used the burrito method when attaching my yoke to the bodice pieces (they used a different method in the instructions) and unfortunately they left out the zipper installation instructions for the tester pattern (which they said will also be included in the finalized pattern). The zipper is where my only real issue with this pattern came into play. There was literally nothing about how to attach the zipper to the front pieces, so when I came to that part of the construction I decided to forgo the zipper altogether. The front zipper was my least favorite part of the jumpsuit design, only because, at least for the tester version, there was no hidden placket or flap to conceal it, so it was just a big zipper going from crotch to neck. As I’ve said, I love how practical this garment is, but I felt like the zipper made it look a bit too simple or costumey- for me it was just missing some element of sophistication. I decided at the last minute to draft some front facings to each bodice piece so that I could fold them in and use snaps to close the garment up instead of the zipper.

I wish I had taken better notes on how to achieve this look because, although Alice & Co. loved my finished jumpsuit and told us testers that they were going to include some button/snap placket options to include with the zipper, I just found out that they thought the placket was “too complicated” to include in the pattern and they decided not to add the option after all. I beg to differ on this point since I was able to figure the placket out on my own and I am by no means a designer- I think that with the proper instructions, a beginning sewist could just as easily create a beautiful placket as they could a front zipper, there are just more steps. I must admit, I was disappointed to find that they were leaving the placket option out of the pattern because they seemed so excited about it at first and it felt like my most significant contribution as a pattern tester. But then this morning they sent me an email saying that they might offer the plackets as a hack to be released in the coming weeks, so I will keep my fingers crossed that they offer that option up to future makers of the pattern.

I can’t remember exactly what I did to create my front button plackets but it wasn’t very scientific anyways. I modeled it after another jumpsuit I made (hasn’t made it to the blog yet) which has a front button placket. Essentially I drafted two facings for each side of the bodice that extended from the crotch to the neckline which were about 4 inches wide, interfaced them, sewed them to the bodice front edges, then I understitched them. Because these pieces were not drafted and taken into account from the beginning of the make, they aren’t lined up perfectly in the center of the jumpsuit, and the overlap of the bodice fronts is pretty narrow- there is only like an inch or so of overlapping fabric underneath the snaps, but it was still plenty of room for me to attach them. If I had known I wanted to add these plackets from the beginning of the make, I would have extended the front bodice edges out a couple of inches so that they overlapped instead of met at the center (a zipper means each edge will meet together roughly in the center, with the zipper taking up a little bit of space, but for a placket, the pieces are drafted to be wider so that they can overlap, if that makes sense- you need the right and left front bodice edges to sit on top of each other so that a button or snap can be attached to both pieces of fabric and connected).

On the bottom of the crotch, after snipping into the seam line to allow the facings to be tacked down to one side, I topstitched the edge of the placket onto the front of the pants to keep it in place. I also extended the collar just a bit to accommodate the adjusted neckline. Lastly, I extended the waist band pieces further towards the front center of the jumpsuit and I inserted a length of elastic inside it and sewed it down on the fronts and side seams. I knew I would never style this jumpsuit with a belt the way that the pattern photo showed, but I also knew I didn’t want the waist to be totally loose around my body, since there is a a lot of ease drafted into the pattern. I left the elastic pretty loose so it doesn’t hug my waist but it cinches in enough to make me feel like I am not wearing a tent. Aside from shortening the lengths of the sleeves and pants legs to fit my petite frame, those are the major adjustments I made to the pattern.

All in all, I really love how this jumpsuit came out and I think it’s a dead ringer for the original Madewell jumpsuit (above) that I fell in love with, except this one actually fits me. My favorite thing about the design of this garment (besides the great drafting) is the collar- it’s a very simple one-piece collar, nothing particularly special about it, but I think it works so well on these coveralls, and I wish I had made my dusty rose jumpsuit with this collar instead- next time!

Although I absolutely want to make one of these jumpsuits in a lightweight yellow twill like the Madewell inspo one, I like how this striped linen (gifted to me by Mimi G…and by “gifted” I mean she let me rifle through her shelves of giveaway fabric one day lol) works with this pattern- I knew I was toeing the line to have it look like a prisoner’s uniform with the vertical stripes and subdued color, but it doesn’t look nearly as drab as all that. It’s really fun and easy to wear and I have had NOTHING but compliments on this thing every time I wear it. I have dressed it down with my memade sneakers (as seen in these photos) and I have also worn it with clogs which made it feel slightly more dolled up- there are a lots of cool ways to style this garment and I am excited to discover more of them (I’ve always wanted to wear something like this with a t shirt underneath and the top half off with the sleeves tied around my waist! It’s like Car Mechanic Realness!)

As for whether or not I will ever pattern test again? Who knows! Maybe if it’s for a design I am super excited about, like this one, or a pattern company I love. Alice & Co. was friendly and gracious throughout the process, and despite my disappointment about them not offering more options for the final version, I think the jumpsuit is a great pattern and will be fun for beginning and intermediate sewists alike. The real question is… has my my thirst for jumpsuits finally been quenched?!